OGRE-Next  4.0.0unstable
Object-Oriented Graphics Rendering Engine
What's new in Ogre 2.3

Since Ogre 2.2 there are multiple changes that warrant bumping the minor version to 2.3:

  • Mesh::importV1 deprecated over createByImportingV1
  • Unlit shaders unification can cause a few minor headaches if the old
  • Shader templates mix with the new ones
  • Upcoming Normal Offset Bias
  • Vulkan RenderSystem

Switch importV1 to createByImportingV1

In 2.2.2 and earlier we had a function called Mesh::importV1 which would populate a v2 mesh by filling it with data from a v1 mesh, effectively importing it.

In 2.2.3 users should use MeshManager::createByImportingV1 instead. This function 'remembers' which meshes have been created through a conversion process, which allows device lost handling to repeat this import process and recreate the resources.

Aside from this little difference, there are no major functionality changes and the function arguments are the same.

Shadow's Normal Offset Bias

We've had a couple complaints, but it wasn't until user SolarPortal made a more exhaustive research where we realized we were not using state of the art shadow mapping techniques.

We were relying on hlmsManager->setShadowMappingUseBackFaces( true ) to hide most self-occlussion errors, but this caused other visual errors.

Normal Offset Bias is a technique from 2011 (yes, it's old!) which drastically improves self occlussion and shadow acne while improving overall shadow quality; and is much more robust than using inverted-culling during the caster pass.

Therefore this technique replaced the old one and the function HlmsManager::setShadowMappingUseBackFaces() has been removed.

Users can globally control normal-offset and constant biases per cascade by tweaking ShadowTextureDefinition::normalOffsetBias and ShadowTextureDefinition::constantBiasScale respectively.

You can also control them via compositors scripts in the shadow node declaration, using the new keywords constant_bias_scale and normal_offset_bias

Users porting from 2.2.x may notice their shadows are a bit different (for the better!), but may encounter some self shadowing artifacts. Thus they may have to adjust these two biases if they need to.

Unlit vertex and pixel shaders unified

Unlit shaders were still duplicating its code 3 times (one for each RenderSystem) and all of its vertex & pixel shader code has been unified into a single .any file.

Although this shouldn't impact you at all, users porting from 2.2.x need to make sure old Hlms shader templates from Unlit don't linger and get mixed with the new files.

Pay special attention the files from Samples/Media/Hlms/Unlit match 1:1 the ones in your project and there aren't stray .glsl/.hlsl/.metal files from an older version.

If you have customized the Unlit implementation, you may find your customizations to be broken. But they're easy to fix. For reference look at Colibri's two commits which ported its Unlit customizations from 2.2.x to 2.3.0

Added HlmsMacroblock::mDepthClamp

It is now possible to toggle Depth Clamp on/off. Check if it's supported via RSC_DEPTH_CLAMP. All desktop GPU should support it unless you're using extremely old OpenGL drivers. iOS supports it since A11 chip (iPhone 8 or newer)

Users upgrading from older Ogre versions should be careful their libraries and headers don't get out of sync. A full rebuild is recommended.

The reason being is that HlmsMacroblock (which is used almost anywhere in Ogre) added a new member variable. And if a DLL or header gets out of sync, it likely won't crash but the artifacts will be very funny (most likely depth buffer will be disabled).

Added shadow pancaking

With the addition of depth clamp, we are now able to push the near plane of directional shadow maps in PSSM (non-stable variant). This greatly enhances depth buffer precision and reduces self-occlusion and acne bugs.

This improvement may make it possible for users to try using PFG_D16_UNORM instead of PFG_D32_FLOAT for shadow mapping, halving memory consumption.

Shadow pancaking is automatically disabled when depth clamp is not supported.

PluginOptional

Old timers may remember that Ogre could crash if the latest DirectX runtimes were not installed, despite having an OpenGL backend as a fallback.

This was specially true during the Win 9x and Win XP eras which may not have DirectX 9.0c support. And stopped being an issue in the last decade since... well everyone has it now.

This problem came back with the Vulkan plugin, as laptops having very old drivers (e.g. from 2014) with GPUs that were perfectly capable of running Vulkan would crash due to missing system DLLs.

Furthermore, if the GPU cannot do Vulkan, Ogre would also crash.

We added the keyword PluginOptional to the Plugins.cfg file. With this, Ogre will try to load OpenGL, D3D11, Metal and/or Vulkan; and if these plugins fail to load, they will be ignored.

Make sure to update your Plugins.cfg to use this feature to provide a good experience to all of your users, even if they've got old HW or SW.

Other relevant information when porting

  • HlmsListener::hlmsTypeChanged added an argument. Beware of it if you are overloading this function
  • HlmsListener::propertiesMergedPreGenerationStep changed its arguments. Beware of it if you are overloading this function
  • Terra's compositor does not need to expose terrain shadows' texture anymore. This is done automatically.
  • Root() constructor now takes one last string parameter to set the app's name. Use this string to tell vendors your app's name so they can create custom driver profiles.
  • SMAA was using PFG_D24_UNORM_S8_UINT, now it uses PFG_D32_FLOAT_S8X24_UINT
  • SMAA shaders were updated. If you were using SMAA, remember to grab the latest ones
  • RenderSystem::_setTexture added an argument which almost always should be set to false (should only be set to true if rendering to a depth buffer without writing to it while also binding that same depth buffer as a texture for sampling).
  • TextureGpu now has getInternalWidth and getInternalHeight. This happens because Vulkan on Android may require us to rotate the window ourselves to avoid performance degradation instead of letting the OS or HW do it (see TextureGpu::setOrientationMode). If orientation mode is 90° or 270°, then getInternalWidth returns the height and getInternalHeight returns the width). It is only relevant for Vulkan on Android. This is important if you need to perform copy operations or use AsyncTextureTickets on oriented textures.
  • CompositorManager2::addWorkspace removed the last parameters. ResourceLayoutMap and ResourceAccessMap are no longer needed, they're automatic. addWorkspace now accepts a ResourceStatusMap in case the workspace needs to assume the texture is in a specific initial layout (very unlikely)
  • Terra's compositor setup has changed again, but this time it's been simplified. It is no longer needed to expose the shadow map texture.
  • If you see 'Transitioning texture <Texture Name> from Undefined to a read-only layout. Perhaps you didn't want to set TextureFlags::DiscardableContent / aka keep_content in compositor?' messages, then you need to add 'keep_content' to the compositor's declaration. e.g.

Old: texture prevFrameDepthBuffer target_width target_height PFG_R32_FLOAT uav

New: texture prevFrameDepthBuffer target_width target_height PFG_R32_FLOAT uav keep_content

This is normal for textures whose contents are meant to be carried over from the previous frame.

Do not call notifyDataIsReady more than needed

In Ogre 2.2 you could call notifyDataIsReady as many times as you want. In fact we gave the following example which is now possibly wrong:

stagingTexture->startMapRegion();
TextureBox box0 = stagingTexture->mapRegion( width, height, depth, slices, pixelFormat );
... write to box0.data ...
TextureBox box1 = stagingTexture->mapRegion( width, height, depth, slices, pixelFormat );
... write to box1.data ...
stagingTexture->stopMapRegion();
stagingTexture->upload( box0, texture0 );
stagingTexture->upload( box1, texture1 );
textureManager.removeStagingTexture( stagingTexture );
texture0->notifyDataIsReady();
texture1->notifyDataIsReady();

However in Ogre 2.3 every notifyDataIsReady must previously have had a call to scheduleTransitionTo (Resident) or scheduleReupload, assuming you didn't cancel the load e.g. assuming you didn't do this:

tex->scheduleTransitionTo( GpuResidency::Resident );
tex->scheduleTransitionTo( GpuResidency::OnStorage );
// Must NOT call tex->notifyDataIsReady();
@ Resident
VRAM and other GPU resources have been allocated for this resource.
Definition: OgreGpuResource.h:66
@ OnStorage
Texture is on storage (i.e.
Definition: OgreGpuResource.h:49

Additionally for ManualTexture textures, Ogre automatically calls notifyDataIsReady as soon as the texture becomes resident. Thus notifyDataIsReady shouldn not be called by the user if TextureFlags::ManualTexture flag is set.

The solution is simple: Remove the call to notifyDataIsReady, since it wasn't previous needed, and now it must not be there.

If the assert is triggering inside Ogre, then it means you previously called notifyDataIsReady on that texture and now Ogre is doing it again. Find where you're calling notifyDataIsReady and remove that line.

Terra, SSAO, Postprocessing samples and v1 Overlays were updated to reflect this change.

Global changes for Vulkan compatibility:

  • GraphicsSystem::initialize has changed slightly. Look for SDL2x11 and VSync Method
  • The last compositor pass to render to the screen must set RenderPassDescriptor::mReadyWindowForPresent (Vulkan requirement). This is handled automatically in CompositorManager2::prepareRenderWindowsForPresent whenever the compositor chain changes. However if the workspace that presents to screen is disabled (i.e. you call CompositorWorkspace::_update manually) then you'll have to set this out yourself. The same happens if the last pass is a custom pass calls initialize( rtv ) but never calls setRenderPassDescToCurrent.
    • EmptyProject's CMake scripts have been updated to account Vulkan plugin