#include <OgreInstantRadiosity.h>

Classes
struct	AreaOfInterest
	Areas of Interest are defined by both AABB and distance (can be 0). More...

Public Types
typedef vector< AreaOfInterest >::type	AreaOfInterestVec
	Areas of interest. More...

Public Member Functions
	InstantRadiosity (SceneManager sceneManager, HlmsManager hlmsManager)

	~InstantRadiosity ()

void	build ()

void	clear ()
	Clears everything, removing our VPLs. More...

void	fillIrradianceVolume (IrradianceVolume *volume, Vector3 cellSize, Vector3 volumeOrigin, Real lightMaxPower, bool fadeAttenuationOverDistance)

void	freeMemory ()
	"build" will download meshes for raycasting. More...

bool	getEnableDebugMarkers () const

bool	getUseIrradianceVolume () const

bool	getUseTextures () const

void	setEnableDebugMarkers (bool bEnable)

void	setUseIrradianceVolume (bool bUseIrradianceVolume)
	Whether to use Irradiance Volume instead of VPLs. More...

void	setUseTextures (bool bUseTextures)
	Whether to evaluate diffuse & detail map textures. More...

void	suggestIrradianceVolumeParameters (const Vector3 &inCellSize, Vector3 &outVolumeOrigin, Real &outLightMaxPower, uint32 &outNumBlocksX, uint32 &outNumBlocksY, uint32 &outNumBlocksZ)
	Outputs suggested parameters for a volumetric texture that will encompass all VPLs. More...

void	updateExistingVpls ()
	Does nothing if build hasn't been called yet. More...

Public Attributes
AreaOfInterestVec	mAoI

Real	mBias
	Value ideally in range (0; 1] When 1, the VPL is placed at exactly the location where the light ray hits the triangle. More...

Real	mCellSize
	Controls how we cluster multiple VPLs into one averaged VPL. More...

uint8	mFirstRq

uint8	mLastRq

uint32	mLightMask

uint32	mMipmapBias

size_t	mNumRayBounces
	In range [0; inf). More...

size_t	mNumRays
	Number of rays to trace. More...

uint32	mNumSpreadIterations

Real	mSpreadThreshold

Real	mSurvivingRayFraction
	In range (0; 1]; how many rays that fired in the previous bounce should survive for a next round of bounces. More...

uint32	mVisibilityMask

Real	mVplConstAtten

double	mVplIntensityRangeMultiplier

Real	mVplLinearAtten

Real	mVplMaxRange
	ANY CHANGE TO A mVpl* variable will take effect after calling updateExistingVpls (or calling build) How big each VPL should be. More...

Real	mVplPowerBoost
	Tweaks how strong VPL lights should be. More...

Real	mVplQuadAtten

Real	mVplThreshold
	If all three components of the diffuse colour of a VPL light is below this threshold, the VPL is removed (useful for improving performance for VPLs that barely contribute to the scene). More...

bool	mVplUseIntensityForMaxRange
	When true, mVplIntensityRangeMultiplier will be used and each VPL will have a dynamic max range (can't exceed mVplMaxRange though), based on its intensity (smaller VPLs = shorter ranges, powerful VPLs = larger ranges) More...

Member Typedef Documentation

◆ AreaOfInterestVec

typedef vector<AreaOfInterest>::type Ogre::InstantRadiosity::AreaOfInterestVec

Areas of interest.

Only used for directional lights. Normally you don't want to use Instant Radiosity for empty landscapes because a regular environment map and simple math can take care of that. You want to focus on a particular building, or in different cities; but not everything. If left unfilled, the system will auto-calculate one (not recommended). See AreaOfInterest

Constructor & Destructor Documentation

◆ InstantRadiosity()

Ogre::InstantRadiosity::InstantRadiosity	(	SceneManager *	sceneManager,
		HlmsManager *	hlmsManager
	)

◆ ~InstantRadiosity()

Ogre::InstantRadiosity::~InstantRadiosity ( )

Member Function Documentation

◆ build()

void Ogre::InstantRadiosity::build ( )

◆ clear()

void Ogre::InstantRadiosity::clear ( )

Clears everything, removing our VPLs.

Does not freeMemory. You will have to call build again to get VPLs again.

◆ fillIrradianceVolume()

void Ogre::InstantRadiosity::fillIrradianceVolume	(	IrradianceVolume *	volume,
		Vector3	cellSize,
		Vector3	volumeOrigin,
		Real	lightMaxPower,
		bool	fadeAttenuationOverDistance
	)

Parameters

volume
cellSize
volumeOrigin
lightMaxPower
fadeAttenuationOverDistance	Whether to fade the attenuation with distance (not physically based). See ForwardPlusBase::setFadeAttenuationRange

◆ freeMemory()

void Ogre::InstantRadiosity::freeMemory ( )

"build" will download meshes for raycasting.

We will not free them after build (in case you want to build again). If you wish to free that memory, call this function.

◆ getEnableDebugMarkers()

bool Ogre::InstantRadiosity::getEnableDebugMarkers ( ) const

inline

◆ getUseIrradianceVolume()

bool Ogre::InstantRadiosity::getUseIrradianceVolume ( ) const

inline

◆ getUseTextures()

bool Ogre::InstantRadiosity::getUseTextures ( ) const

inline

◆ setEnableDebugMarkers()

void Ogre::InstantRadiosity::setEnableDebugMarkers ( bool bEnable )

◆ setUseIrradianceVolume()

void Ogre::InstantRadiosity::setUseIrradianceVolume ( bool bUseIrradianceVolume )

Whether to use Irradiance Volume instead of VPLs.

Parameters

bUseIrradianceVolume Whether to use Irradiance Volume.

◆ setUseTextures()

void Ogre::InstantRadiosity::setUseTextures ( bool bUseTextures )

Whether to evaluate diffuse & detail map textures.

Disabling textures can speed up build() time and significantly reduce memory consumption, at the expense of more innacurate results (only material diffuse colour will be considered)

Remarks: Changing this setting implies calling freeMemory!

Parameters

bUseTextures Whether to enable or disable using diffuse textures (and detail maps).

◆ suggestIrradianceVolumeParameters()

void Ogre::InstantRadiosity::suggestIrradianceVolumeParameters	(	const Vector3 &	inCellSize,
		Vector3 &	outVolumeOrigin,
		Real &	outLightMaxPower,
		uint32 &	outNumBlocksX,
		uint32 &	outNumBlocksY,
		uint32 &	outNumBlocksZ
	)

Outputs suggested parameters for a volumetric texture that will encompass all VPLs.

They are suggestions, you don't have to follow them.

Parameters

inCellSize	The size of the voxel size. Doesn't have to match mCellSize. The suggested output parameters will be based on this input parameter.
outVolumeOrigin	Where the volume should start. This value will be in the same unit of measure you are working with (your Items/Entities, mCellSize). If your Items and mCellSize are in centimeters, this value will be in cm. If you've been working in meters, it will be in meters. This value will be quantized to increments of mCellSize, and that's the only requirement (we'll quantize it for you if you change it later).
outLightMaxPower	The maximum light power of the brightest VPL. Useful to maximize the quality of the 10-bits we use for the 3D texture.
outNumBlocksX	The suggested with for the volume texture. Volume's width in units will be: outVolumeOrigin.x + mCellSize * outNumBlocksX;
outNumBlocksY	The suggested with for the volume texture times 6. Volume's height in units will be: outVolumeOrigin.y + mCellSize * outNumBlocksY;
outNumBlocksZ	The suggested depth for the volume texture times. Volume's depth in units will be: outVolumeOrigin.z + mCellSize * outNumBlocksZ;

◆ updateExistingVpls()

void Ogre::InstantRadiosity::updateExistingVpls ( )

Does nothing if build hasn't been called yet.

Updates VPLs with the latest changes made to all mVpl* variables. May create/remove VPL lights because of mVplThreshold

Member Data Documentation

◆ mAoI

AreaOfInterestVec Ogre::InstantRadiosity::mAoI

◆ mBias

Real Ogre::InstantRadiosity::mBias

Value ideally in range (0; 1] When 1, the VPL is placed at exactly the location where the light ray hits the triangle.

At 0.99 it will be placed at 99% the distance from light to the location (i.e. moves away from the triangle). Using Bias can help with light bleeding, and also allows reducing mVplMaxRange (thus increasing performance) at the cost of lower accuracy but still "looking good".

◆ mCellSize

Real Ogre::InstantRadiosity::mCellSize

Controls how we cluster multiple VPLs into one averaged VPL.

Smaller values generate more VPLs (reducing performance but improving quality). Bigger values result in less VPLs (higher performance, less quality)

◆ mFirstRq

uint8 Ogre::InstantRadiosity::mFirstRq

◆ mLastRq

uint8 Ogre::InstantRadiosity::mLastRq

◆ mLightMask

uint32 Ogre::InstantRadiosity::mLightMask

◆ mMipmapBias

uint32 Ogre::InstantRadiosity::mMipmapBias

◆ mNumRayBounces

size_t Ogre::InstantRadiosity::mNumRayBounces

In range [0; inf).

Controls how many bounces we'll generate. Increases the total number of rays (i.e. more than mNumRays).

◆ mNumRays

size_t Ogre::InstantRadiosity::mNumRays

Number of rays to trace.

More usually results in more accuracy. Sometimes really low values (e.g. 32 rays) may achieve convincing results with high performance, while high large values (e.g. 10000) achieve more accurate results.

◆ mNumSpreadIterations

uint32 Ogre::InstantRadiosity::mNumSpreadIterations

◆ mSpreadThreshold

Real Ogre::InstantRadiosity::mSpreadThreshold

◆ mSurvivingRayFraction

Real Ogre::InstantRadiosity::mSurvivingRayFraction

In range (0; 1]; how many rays that fired in the previous bounce should survive for a next round of bounces.

◆ mVisibilityMask

uint32 Ogre::InstantRadiosity::mVisibilityMask

◆ mVplConstAtten

Real Ogre::InstantRadiosity::mVplConstAtten

◆ mVplIntensityRangeMultiplier

double Ogre::InstantRadiosity::mVplIntensityRangeMultiplier

◆ mVplLinearAtten

Real Ogre::InstantRadiosity::mVplLinearAtten

◆ mVplMaxRange

Real Ogre::InstantRadiosity::mVplMaxRange

ANY CHANGE TO A mVpl* variable will take effect after calling updateExistingVpls (or calling build) How big each VPL should be.

Larger ranges leak light more but also are more accurate in the sections they lit correctly, but they are also get more expensive.

◆ mVplPowerBoost

Real Ogre::InstantRadiosity::mVplPowerBoost

Tweaks how strong VPL lights should be.

In range (0; inf)

◆ mVplQuadAtten

Real Ogre::InstantRadiosity::mVplQuadAtten

◆ mVplThreshold

Real Ogre::InstantRadiosity::mVplThreshold

If all three components of the diffuse colour of a VPL light is below this threshold, the VPL is removed (useful for improving performance for VPLs that barely contribute to the scene).

◆ mVplUseIntensityForMaxRange

bool Ogre::InstantRadiosity::mVplUseIntensityForMaxRange

When true, mVplIntensityRangeMultiplier will be used and each VPL will have a dynamic max range (can't exceed mVplMaxRange though), based on its intensity (smaller VPLs = shorter ranges, powerful VPLs = larger ranges)

The documentation for this class was generated from the following file:

OgreInstantRadiosity.h

Classes

Public Types

Public Member Functions

Public Attributes

Member Typedef Documentation

◆ AreaOfInterestVec

Constructor & Destructor Documentation

◆ InstantRadiosity()

◆ ~InstantRadiosity()

Member Function Documentation

◆ build()

◆ clear()

◆ fillIrradianceVolume()

◆ freeMemory()

◆ getEnableDebugMarkers()

◆ getUseIrradianceVolume()

◆ getUseTextures()

◆ setEnableDebugMarkers()

◆ setUseIrradianceVolume()

◆ setUseTextures()

◆ suggestIrradianceVolumeParameters()

◆ updateExistingVpls()

Member Data Documentation

◆ mAoI

◆ mBias

◆ mCellSize

◆ mFirstRq

◆ mLastRq

◆ mLightMask

◆ mMipmapBias

◆ mNumRayBounces

◆ mNumRays

◆ mNumSpreadIterations

◆ mSpreadThreshold

◆ mSurvivingRayFraction

◆ mVisibilityMask

◆ mVplConstAtten

◆ mVplIntensityRangeMultiplier

◆ mVplLinearAtten

◆ mVplMaxRange

◆ mVplPowerBoost

◆ mVplQuadAtten

◆ mVplThreshold

◆ mVplUseIntensityForMaxRange