Specialisation of HardwareVertexBuffer for D3D11. More...

#include <OgreD3D11HardwareVertexBuffer.h>

Inheritance diagram for Ogre::v1::D3D11HardwareVertexBuffer:

Public Types
enum	LockOptions { HBL_NORMAL , HBL_DISCARD , HBL_READ_ONLY , HBL_NO_OVERWRITE , HBL_WRITE_ONLY }
	Locking options. More...

enum	Usage { HBU_STATIC = 1 , HBU_DYNAMIC = 2 , HBU_WRITE_ONLY = 4 , HBU_DISCARDABLE = 8 , HBU_STATIC_WRITE_ONLY = 5 , HBU_DYNAMIC_WRITE_ONLY = 6 , HBU_DYNAMIC_WRITE_ONLY_DISCARDABLE = 14 }
	Enums describing buffer usage; not mutually exclusive. More...

Public Member Functions
	D3D11HardwareVertexBuffer (HardwareBufferManagerBase *mgr, size_t vertexSize, size_t numVertices, HardwareBuffer::Usage usage, D3D11Device &device, bool useSystemMem, bool useShadowBuffer, bool streamOut)

	~D3D11HardwareVertexBuffer () override

virtual void	_updateFromShadow ()
	Updates the real buffer from the shadow buffer, if required. More...

virtual void	copyData (HardwareBuffer &srcBuffer)
	Copy all data from another buffer into this one. More...

void	copyData (HardwareBuffer &srcBuffer, size_t srcOffset, size_t dstOffset, size_t length, bool discardWholeBuffer=false) override
	Copy data from another buffer into this one. More...

ID3D11Buffer *	getD3DVertexBuffer () const
	Get the D3D-specific vertex buffer. More...

size_t	getInstanceDataStepRate () const
	Get the number of instances to draw using the same per-instance data before advancing in the buffer by one element. More...

bool	getIsInstanceData () const
	Get if this vertex buffer is an "instance data" buffer (per instance) More...

HardwareBufferManagerBase *	getManager () const
	Return the manager of this buffer, if any. More...

size_t	getNumVertices () const
	Get the number of vertices in this buffer. More...

virtual void *	getRenderSystemData ()
	An internal function that should be used only by a render system for internal use. More...

size_t	getSizeInBytes () const
	Returns the size of this buffer in bytes. More...

Usage	getUsage () const
	Returns the Usage flags with which this buffer was created. More...

size_t	getVertexSize () const
	Gets the size in bytes of a single vertex in this buffer. More...

bool	hasShadowBuffer () const
	Returns whether this buffer has a system memory shadow for quicker reading. More...

bool	isLocked () const

bool	isSystemMemory () const
	Returns whether this buffer is held in system memory. More...

void *	lock (LockOptions options)
	Lock the entire buffer for (potentially) reading / writing. More...

void *	lock (size_t offset, size_t length, LockOptions options) override
	Lock the buffer for (potentially) reading / writing. More...

void	operator delete (void *ptr)

void	operator delete (void ptr, const char , int, const char *)

void	operator delete (void ptr, void )

void	operator delete[] (void *ptr)

void	operator delete[] (void ptr, const char , int, const char *)

void *	operator new (size_t sz)

void *	operator new (size_t sz, const char file, int line, const char func)
	operator new, with debug line info More...

void *	operator new (size_t sz, void *ptr)
	placement operator new More...

void *	operator new[] (size_t sz)

void *	operator new[] (size_t sz, const char file, int line, const char func)
	array operator new, with debug line info More...

void	readData (size_t offset, size_t length, void *pDest) override
	Reads data from the buffer and places it in the memory pointed to by pDest. More...

void	setInstanceDataStepRate (const size_t val)
	Set the number of instances to draw using the same per-instance data before advancing in the buffer by one element. More...

void	setIsInstanceData (const bool val)
	Set if this vertex buffer is an "instance data" buffer (per instance) More...

void	suppressHardwareUpdate (bool suppress)
	Pass true to suppress hardware upload of shadow buffer changes. More...

void	unlock () override
	Releases the lock on this buffer. More...

void	writeData (size_t offset, size_t length, const void *pSource, bool discardWholeBuffer=false) override
	Writes data to the buffer from an area of system memory; note that you must ensure that your buffer is big enough. More...

Detailed Description

Specialisation of HardwareVertexBuffer for D3D11.

Member Enumeration Documentation

◆ LockOptions

enum Ogre::v1::HardwareBuffer::LockOptions

inherited

Locking options.

Enumerator
HBL_NORMAL	Normal mode, ie allows read/write and contents are preserved.
HBL_DISCARD	Discards the entire buffer while locking; this allows optimisation to be performed because synchronisation issues are relaxed. Only allowed on buffers created with the HBU_DYNAMIC flag.
HBL_READ_ONLY	Lock the buffer for reading only. Not allowed in buffers which are created with HBU_WRITE_ONLY. Mandatory on static buffers, i.e. those created without the HBU_DYNAMIC flag.
HBL_NO_OVERWRITE	As HBL_DISCARD, except the application guarantees not to overwrite any region of the buffer which has already been used in this frame, can allow some optimisation on some APIs.
HBL_WRITE_ONLY	Lock the buffer for writing only.

◆ Usage

enum Ogre::v1::HardwareBuffer::Usage

inherited

Enums describing buffer usage; not mutually exclusive.

Enumerator
HBU_STATIC	Static buffer which the application rarely modifies once created. Modifying the contents of this buffer will involve a performance hit.
HBU_DYNAMIC	Indicates the application would like to modify this buffer with the CPU fairly often. Buffers created with this flag will typically end up in AGP memory rather than video memory.
HBU_WRITE_ONLY	Indicates the application will never read the contents of the buffer back, it will only ever write data. Locking a buffer with this flag will ALWAYS return a pointer to new, blank memory rather than the memory associated with the contents of the buffer; this avoids DMA stalls because you can write to a new memory area while the previous one is being used.
HBU_DISCARDABLE	Indicates that the application will be refilling the contents of the buffer regularly (not just updating, but generating the contents from scratch), and therefore does not mind if the contents of the buffer are lost somehow and need to be recreated. This allows and additional level of optimisation on the buffer. This option only really makes sense when combined with HBU_DYNAMIC_WRITE_ONLY.
HBU_STATIC_WRITE_ONLY	Combination of HBU_STATIC and HBU_WRITE_ONLY.
HBU_DYNAMIC_WRITE_ONLY	Combination of HBU_DYNAMIC and HBU_WRITE_ONLY. If you use this, strongly consider using HBU_DYNAMIC_WRITE_ONLY_DISCARDABLE instead if you update the entire contents of the buffer very regularly.
HBU_DYNAMIC_WRITE_ONLY_DISCARDABLE	Combination of HBU_DYNAMIC, HBU_WRITE_ONLY and HBU_DISCARDABLE.

Constructor & Destructor Documentation

◆ D3D11HardwareVertexBuffer()

Ogre::v1::D3D11HardwareVertexBuffer::D3D11HardwareVertexBuffer	(	HardwareBufferManagerBase *	mgr,
		size_t	vertexSize,
		size_t	numVertices,
		HardwareBuffer::Usage	usage,
		D3D11Device &	device,
		bool	useSystemMem,
		bool	useShadowBuffer,
		bool	streamOut
	)

◆ ~D3D11HardwareVertexBuffer()

Ogre::v1::D3D11HardwareVertexBuffer::~D3D11HardwareVertexBuffer ( )

override

Member Function Documentation

◆ _updateFromShadow()

virtual void Ogre::v1::HardwareBuffer::_updateFromShadow ( )

inlinevirtualinherited

Updates the real buffer from the shadow buffer, if required.

Reimplemented in Ogre::v1::VulkanHardwareVertexBuffer, Ogre::v1::VulkanHardwareIndexBuffer, Ogre::v1::MetalHardwareVertexBuffer, Ogre::v1::MetalHardwareIndexBuffer, Ogre::v1::GL3PlusHardwareVertexBuffer, Ogre::v1::GL3PlusHardwareIndexBuffer, and Ogre::v1::D3D11HardwareBuffer.

◆ copyData() [1/2]

virtual void Ogre::v1::HardwareBuffer::copyData ( HardwareBuffer & srcBuffer )

inlinevirtualinherited

Copy all data from another buffer into this one.

Remarks: Normally these buffers should be of identical size, but if they're not, the routine will use the smallest of the two sizes.

References Ogre::v1::HardwareBuffer::getSizeInBytes().

◆ copyData() [2/2]

void Ogre::v1::D3D11HardwareVertexBuffer::copyData	(	HardwareBuffer &	srcBuffer,
		size_t	srcOffset,
		size_t	dstOffset,
		size_t	length,
		bool	discardWholeBuffer = `false`
	)

overridevirtual

Copy data from another buffer into this one.

Remarks: Note that the source buffer must not be created with the usage HBU_WRITE_ONLY otherwise this will fail.

Parameters

srcBuffer	The buffer from which to read the copied data
srcOffset	Offset in the source buffer at which to start reading
dstOffset	Offset in the destination buffer to start writing
length	Length of the data to copy, in bytes.
discardWholeBuffer	If true, will discard the entire contents of this buffer before copying

Reimplemented from Ogre::v1::HardwareBuffer.

◆ getD3DVertexBuffer()

ID3D11Buffer* Ogre::v1::D3D11HardwareVertexBuffer::getD3DVertexBuffer ( ) const

Get the D3D-specific vertex buffer.

◆ getRenderSystemData()

virtual void* Ogre::v1::HardwareBuffer::getRenderSystemData ( )

inlinevirtualinherited

An internal function that should be used only by a render system for internal use.

Reimplemented in Ogre::v1::VulkanHardwareVertexBuffer, Ogre::v1::VulkanHardwareIndexBuffer, Ogre::v1::MetalHardwareVertexBuffer, and Ogre::v1::MetalHardwareIndexBuffer.

◆ getSizeInBytes()

size_t Ogre::v1::HardwareBuffer::getSizeInBytes ( ) const

inlineinherited

Returns the size of this buffer in bytes.

Referenced by Ogre::v1::HardwareBuffer::copyData().

◆ getUsage()

Usage Ogre::v1::HardwareBuffer::getUsage ( ) const

inlineinherited

Returns the Usage flags with which this buffer was created.

Referenced by Ogre::VerticesRemapInfo::performIndexDataRemap().

◆ hasShadowBuffer()

bool Ogre::v1::HardwareBuffer::hasShadowBuffer ( ) const

inlineinherited

Returns whether this buffer has a system memory shadow for quicker reading.

Referenced by Ogre::VerticesRemapInfo::performIndexDataRemap().

◆ isLocked()

bool Ogre::v1::D3D11HardwareVertexBuffer::isLocked ( ) const

◆ isSystemMemory()

bool Ogre::v1::HardwareBuffer::isSystemMemory ( ) const

inlineinherited

Returns whether this buffer is held in system memory.

◆ lock() [1/2]

void* Ogre::v1::HardwareBuffer::lock ( LockOptions options )

inlineinherited

Lock the entire buffer for (potentially) reading / writing.

Parameters

options Locking options

Returns: Pointer to the locked memory

◆ lock() [2/2]

void* Ogre::v1::D3D11HardwareVertexBuffer::lock	(	size_t	offset,
		size_t	length,
		LockOptions	options
	)

overridevirtual

Lock the buffer for (potentially) reading / writing.

Parameters

offset	The byte offset from the start of the buffer to lock
length	The size of the area to lock, in bytes
options	Locking options

Returns: Pointer to the locked memory

Reimplemented from Ogre::v1::HardwareBuffer.

◆ operator delete() [1/3]

template<class Alloc >

void Ogre::AllocatedObject< Alloc >::operator delete ( void * ptr )

inlineinherited

◆ operator delete() [2/3]

template<class Alloc >

void Ogre::AllocatedObject< Alloc >::operator delete	(	void *	ptr,
		const char *	,
		int	,
		const char *
	)

inlineinherited

◆ operator delete() [3/3]

template<class Alloc >

void Ogre::AllocatedObject< Alloc >::operator delete	(	void *	ptr,
		void *
	)

inlineinherited

◆ operator delete[]() [1/2]

template<class Alloc >

void Ogre::AllocatedObject< Alloc >::operator delete[] ( void * ptr )

inlineinherited

◆ operator delete[]() [2/2]

template<class Alloc >

void Ogre::AllocatedObject< Alloc >::operator delete[]	(	void *	ptr,
		const char *	,
		int	,
		const char *
	)

inlineinherited

◆ operator new() [1/3]

template<class Alloc >

void* Ogre::AllocatedObject< Alloc >::operator new ( size_t sz )

inlineinherited

◆ operator new() [2/3]

template<class Alloc >

void* Ogre::AllocatedObject< Alloc >::operator new	(	size_t	sz,
		const char *	file,
		int	line,
		const char *	func
	)

inlineinherited

operator new, with debug line info

◆ operator new() [3/3]

template<class Alloc >

void* Ogre::AllocatedObject< Alloc >::operator new	(	size_t	sz,
		void *	ptr
	)

inlineinherited

placement operator new

◆ operator new[]() [1/2]

template<class Alloc >

void* Ogre::AllocatedObject< Alloc >::operator new[] ( size_t sz )

inlineinherited

◆ operator new[]() [2/2]

template<class Alloc >

void* Ogre::AllocatedObject< Alloc >::operator new[]	(	size_t	sz,
		const char *	file,
		int	line,
		const char *	func
	)

inlineinherited

array operator new, with debug line info

◆ readData()

void Ogre::v1::D3D11HardwareVertexBuffer::readData	(	size_t	offset,
		size_t	length,
		void *	pDest
	)

overridevirtual

Reads data from the buffer and places it in the memory pointed to by pDest.

Parameters

offset	The byte offset from the start of the buffer to read
length	The size of the area to read, in bytes
pDest	The area of memory in which to place the data, must be large enough to accommodate the data!

Implements Ogre::v1::HardwareBuffer.

◆ suppressHardwareUpdate()

void Ogre::v1::HardwareBuffer::suppressHardwareUpdate ( bool suppress )

inlineinherited

Pass true to suppress hardware upload of shadow buffer changes.

◆ unlock()

void Ogre::v1::D3D11HardwareVertexBuffer::unlock ( )

overridevirtual

Releases the lock on this buffer.

Remarks: Locking and unlocking a buffer can, in some rare circumstances such as switching video modes whilst the buffer is locked, corrupt the contents of a buffer. This is pretty rare, but if it occurs, this method will throw an exception, meaning you must re-upload the data.

: Note that using the 'read' and 'write' forms of updating the buffer does not suffer from this problem, so if you want to be 100% sure your data will not be lost, use the 'read' and 'write' forms instead.

Reimplemented from Ogre::v1::HardwareBuffer.

◆ writeData()

void Ogre::v1::D3D11HardwareVertexBuffer::writeData	(	size_t	offset,
		size_t	length,
		const void *	pSource,
		bool	discardWholeBuffer = `false`
	)

overridevirtual

Writes data to the buffer from an area of system memory; note that you must ensure that your buffer is big enough.

Parameters

offset	The byte offset from the start of the buffer to start writing
length	The size of the data to write to, in bytes
pSource	The source of the data to be written
discardWholeBuffer	If true, this allows the driver to discard the entire buffer when writing, such that DMA stalls can be avoided; use if you can.

Implements Ogre::v1::HardwareBuffer.

The documentation for this class was generated from the following file:

OgreD3D11HardwareVertexBuffer.h

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

◆ LockOptions

◆ Usage

Constructor & Destructor Documentation

◆ D3D11HardwareVertexBuffer()

◆ ~D3D11HardwareVertexBuffer()

Member Function Documentation

◆ _updateFromShadow()

◆ copyData() [1/2]

◆ copyData() [2/2]

◆ getD3DVertexBuffer()

◆ getRenderSystemData()

◆ getSizeInBytes()

◆ getUsage()

◆ hasShadowBuffer()

◆ isLocked()

◆ isSystemMemory()

◆ lock() [1/2]

◆ lock() [2/2]

◆ operator delete() [1/3]

◆ operator delete() [2/3]

◆ operator delete() [3/3]

◆ operator delete[]() [1/2]

◆ operator delete[]() [2/2]

◆ operator new() [1/3]

◆ operator new() [2/3]

◆ operator new() [3/3]

◆ operator new[]() [1/2]

◆ operator new[]() [2/2]

◆ readData()

◆ suppressHardwareUpdate()

◆ unlock()

◆ writeData()