Class representing the state of a single texture unit during a Pass of a Technique, of a Material. More...

#include <OgreTextureUnitState.h>

Inheritance diagram for Ogre::TextureUnitState:

Classes
struct	TextureEffect
	Internal structure defining a texture effect. More...

Public Types
enum	BindingType { BT_FRAGMENT = 0 , BT_VERTEX = 1 , BT_GEOMETRY = 2 , BT_TESSELLATION_HULL = 3 , BT_TESSELLATION_DOMAIN = 4 }
	The type of unit to bind the texture settings to. More...

enum	ContentType { CONTENT_NAMED = 0 , CONTENT_SHADOW = 1 , CONTENT_COMPOSITOR = 2 }
	Enum identifying the type of content this texture unit contains. More...

typedef multimap< TextureEffectType, TextureEffect >::type	EffectMap
	Texture effects in a multimap paired array. More...

enum	EnvMapType { ENV_PLANAR , ENV_CURVED , ENV_REFLECTION , ENV_NORMAL }
	Enumeration to specify type of envmap. More...

enum	TextureCubeFace { CUBE_FRONT = 0 , CUBE_BACK = 1 , CUBE_LEFT = 2 , CUBE_RIGHT = 3 , CUBE_UP = 4 , CUBE_DOWN = 5 }
	Enum identifying the frame indexes for faces of a cube map (not the composite 3D type. More...

enum	TextureEffectType { ET_ENVIRONMENT_MAP , ET_PROJECTIVE_TEXTURE , ET_UVSCROLL , ET_USCROLL , ET_VSCROLL , ET_ROTATE , ET_TRANSFORM }
	Definition of the broad types of texture effect you can apply to a texture unit. More...

enum	TextureTransformType { TT_TRANSLATE_U , TT_TRANSLATE_V , TT_SCALE_U , TT_SCALE_V , TT_ROTATE }
	Useful enumeration when dealing with procedural transforms. More...

Public Types inherited from Ogre::TextureGpuListener
enum	Reason { Unknown , FromStorageToSysRam , FromSysRamToStorage , GainedResidency , LostResidency , PoolTextureSlotChanged , ResidentToSysRamSync , MetadataCacheOutOfDate , ExceptionThrown , FsaaSettingAlteredByApi , ReadyForRendering , Deleted }

Public Member Functions
	TextureUnitState (Pass *parent)
	Default constructor. More...

	TextureUnitState (Pass *parent, const String &texName)
	Name-based constructor. More...

	TextureUnitState (Pass *parent, const TextureUnitState &oth)

	~TextureUnitState () override
	Default destructor. More...

Controller< Real > *	_getAnimController () const
	Gets the animation controller (as created because of setAnimatedTexture) if it exists. More...

TextureGpu *	_getTexturePtr () const
	Get the texture pointer for the current frame. More...

TextureGpu *	_getTexturePtr (size_t frame) const
	Get the texture pointer for a given frame. More...

void	_load ()
	Internal method for loading this object as part of Material::load. More...

void	_notifyParent (Pass *parent)
	Notify this object that its parent has changed. More...

void	_prepare ()
	Internal method for preparing this object for load, as part of Material::prepare. More...

void	_setSamplerblock (const HlmsSamplerblock *samplerblock)
	Changes the current samplerblock for a new one. More...

void	_setTexturePtr (TextureGpu *texptr)
	Set the texture pointer for the current frame (internal use only!). More...

void	_setTexturePtr (TextureGpu *texptr, size_t frame)
	Set the texture pointer for a given frame (internal use only!). More...

void	_unload ()
	Internal method for unloading this object as part of Material::unload. More...

void	_unprepare ()
	Internal method for undoing the preparation this object as part of Material::unprepare. More...

void	addEffect (TextureEffect &effect)
	Generic method for setting up texture effects. More...

void	addFrameTextureName (const String &name)
	Add a Texture name to the end of the frame container. More...

bool	applyTextureAliases (const AliasTextureNamePairList &aliasList, const bool apply=true)
	Applies texture names to Texture Unit State with matching texture name aliases. More...

size_t	calculateSize () const

void	deleteFrameTextureName (const size_t frameNumber)
	Deletes a specific texture frame. More...

const LayerBlendModeEx &	getAlphaBlendMode () const
	Get multitexturing alpha blending mode. More...

Real	getAnimationDuration () const
	Get the animated-texture animation duration. More...

bool	getAutomaticBatching () const

BindingType	getBindingType () const
	Gets the type of unit these texture settings should be bound to. More...

SceneBlendFactor	getColourBlendFallbackDest () const
	Get the multipass fallback for colour blending operation destination factor. More...

SceneBlendFactor	getColourBlendFallbackSrc () const
	Get the multipass fallback for colour blending operation source factor. More...

const LayerBlendModeEx &	getColourBlendMode () const
	Get multitexturing colour blending mode. More...

ContentType	getContentType () const
	Get the type of content this TextureUnitState references. More...

unsigned int	getCurrentFrame () const
	Gets the active frame in an animated or multi-image texture layer. More...

const EffectMap &	getEffects () const
	Get texture effects in a multimap paired array. More...

const String &	getFrameTextureName (unsigned int frameNumber) const
	Gets the name of the texture associated with a frame number. More...

Real	getGamma () const

bool	getIsAlpha () const
	Gets whether this texture is requested to be loaded as alpha if single channel. More...

const String &	getName () const
	Get the name of the Texture Unit State. More...

unsigned int	getNumFrames () const
	Gets the number of frames for a texture. More...

int	getNumMipmaps () const
	Gets how many mipmaps have been requested for the texture. More...

Pass *	getParent () const
	Gets the parent Pass object. More...

IdString	getReferencedTextureName () const
	Gets the name of the texture in the compositor that this texture references. More...

const HlmsSamplerblock *	getSamplerblock () const
	Retrieves current samplerblock. More...

std::pair< size_t, size_t >	getTextureDimensions (unsigned int frame=0) const
	Returns the width and height of the texture in the given frame. More...

const String &	getTextureName () const
	Get the name of current texture image for this layer. More...

const String &	getTextureNameAlias () const
	Gets the Texture Name Alias of the Texture Unit. More...

const Radian &	getTextureRotate () const
	Get texture rotation effects angle value. More...

const Matrix4 &	getTextureTransform () const
	Gets the current texture transformation matrix. More...

TextureTypes::TextureTypes	getTextureType () const
	Returns the type of this texture. More...

Real	getTextureUScale () const
	Get texture uscale value. More...

Real	getTextureUScroll () const
	Get texture uscroll value. More...

Real	getTextureVScale () const
	Get texture vscale value. More...

Real	getTextureVScroll () const
	Get texture vscroll value. More...

bool	hasViewRelativeTextureCoordinateGeneration () const
	Returns whether this unit has texture coordinate generation that depends on the camera. More...

bool	is3D () const
	Returns true if this texture layer uses a composite 3D cubic texture. More...

bool	isBlank () const
	Determines if this texture layer is currently blank. More...

bool	isCubic () const
	Returns true if this texture unit is either a series of 6 2D textures, each in it's own frame, or is a full 3D cube map. More...

bool	isHardwareGammaEnabled () const

bool	isLoaded () const
	Is this loaded? More...

bool	isTextureLoadFailing () const
	Tests if the texture associated with this unit has failed to load. More...

TextureUnitState &	operator= (const TextureUnitState &oth)

void	removeAllEffects ()
	Removes all effects applied to this texture layer. More...

void	removeEffect (const TextureEffectType type)
	Removes a single effect applied to this texture layer. More...

void	retryTextureLoad ()
	Tells the unit to retry loading the texture if it had failed to load. More...

void	setAlphaOperation (LayerBlendOperationEx op, LayerBlendSource source1=LBS_TEXTURE, LayerBlendSource source2=LBS_CURRENT, Real arg1=1.0, Real arg2=1.0, Real manualBlend=0.0)
	Sets the alpha operation to be applied to this texture. More...

void	setAnimatedTextureName (const String &name, unsigned int numFrames, Real duration=0)
	Sets the names of the texture images for an animated texture. More...

void	setAnimatedTextureName (const String *const names, unsigned int numFrames, Real duration=0)
	Sets the names of the texture images for an animated texture. More...

void	setAutomaticBatching (bool automaticBatching)
	When a texture is used by both PBS datablocks and V1 materials it can lead to a few issues: More...

void	setBindingType (BindingType bt)
	Sets the type of unit these texture settings should be bound to. More...

void	setBlank ()
	Sets this texture layer to be blank. More...

void	setColourOperation (const LayerBlendOperation op)
	Determines how this texture layer is combined with the one below it (or the diffuse colour of the geometry if this is layer 0). More...

void	setColourOperationEx (LayerBlendOperationEx op, LayerBlendSource source1=LBS_TEXTURE, LayerBlendSource source2=LBS_CURRENT, const ColourValue &arg1=ColourValue::White, const ColourValue &arg2=ColourValue::White, Real manualBlend=0.0)
	Setting advanced blending options. More...

void	setColourOpMultipassFallback (const SceneBlendFactor sourceFactor, const SceneBlendFactor destFactor)
	Sets the multipass fallback operation for this layer, if you used TextureUnitState::setColourOperationEx and not enough multitexturing hardware is available. More...

void	setCompositorReference (const String &textureName)
	Set the compositor reference for this texture unit state. More...

void	setContentType (ContentType ct)
	Set the type of content this TextureUnitState references. More...

void	setCubicTexture (TextureGpu const texPtrs, bool forUVW=false)
	Sets this texture layer to use a combination of 6 texture maps, each one relating to a face of a cube. More...

void	setCubicTextureName (const String &name, bool forUVW=false)
	Sets this texture layer to use a combination of 6 texture maps, each one relating to a face of a cube. More...

void	setCubicTextureName (const String *const names, bool forUVW=false)
	Sets this texture layer to use a combination of 6 texture maps, each one relating to a face of a cube. More...

void	setCurrentFrame (unsigned int frameNumber)
	Changes the active frame in an animated or multi-image texture. More...

void	setEnvironmentMap (bool enable, EnvMapType envMapType=ENV_CURVED)
	Turns on/off texture coordinate effect that makes this layer an environment map. More...

void	setFrameTextureName (const String &name, unsigned int frameNumber)
	Sets the name of the texture associated with a frame. More...

void	setGamma (Real gamma)

void	setHardwareGammaEnabled (bool enabled)

void	setIsAlpha (bool isAlpha)
	Sets whether this texture is requested to be loaded as alpha if single channel. More...

void	setName (const String &name)
	Set the name of the Texture Unit State. More...

void	setNumMipmaps (int numMipmaps)
	Sets how many mipmaps have been requested for the texture. More...

void	setProjectiveTexturing (bool enabled, const Frustum *projectionSettings=0)
	Enables or disables projective texturing on this texture unit. More...

void	setRotateAnimation (Real speed)
	Sets up an animated texture rotation for this layer. More...

void	setSamplerblock (const HlmsSamplerblock &samplerblock)
	Changes the current samplerblock for a new one. More...

void	setScrollAnimation (Real uSpeed, Real vSpeed)
	Sets up an animated scroll for the texture layer. More...

void	setTexture (TextureGpu *texPtr)
	Sets this texture layer to use a single texture, given the pointer to the texture to use on this layer. More...

void	setTextureName (const String &name, TextureTypes::TextureTypes ttype=TextureTypes::Type2D)
	Sets this texture layer to use a single texture, given the name of the texture to use on this layer. More...

void	setTextureNameAlias (const String &name)
	Set the alias name used for texture frame names. More...

void	setTextureRotate (const Radian &angle)
	Sets the anticlockwise rotation factor applied to texture coordinates. More...

void	setTextureScale (Real uScale, Real vScale)
	Sets the scaling factor applied to texture coordinates. More...

void	setTextureScroll (Real u, Real v)
	Sets the translation offset of the texture, ie scrolls the texture. More...

void	setTextureTransform (const Matrix4 &xform)
	Sets a matrix used to transform any texture coordinates on this layer. More...

void	setTextureUScale (Real value)
	As setTextureScale, but sets only U value. More...

void	setTextureUScroll (Real value)
	As setTextureScroll, but sets only U value. More...

void	setTextureVScale (Real value)
	As setTextureScale, but sets only V value. More...

void	setTextureVScroll (Real value)
	As setTextureScroll, but sets only V value. More...

void	setTransformAnimation (const TextureTransformType ttype, const WaveformType waveType, Real base=0, Real frequency=1, Real phase=0, Real amplitude=1)
	Sets up a general time-relative texture modification effect. More...

Public Member Functions inherited from Ogre::TextureGpuListener
virtual	~TextureGpuListener ()

virtual bool	shouldStayLoaded (TextureGpu *texture)
	Return true if this TextureGpu should likely stay loaded or else graphical changes could occur. More...

Detailed Description

Class representing the state of a single texture unit during a Pass of a Technique, of a Material.

Remarks: Texture units are pipelines for retrieving texture data for rendering onto your objects in the world. Becode Ogre-Next no longer supports the fixed-function pipeline, some of the settings (e.g. setting a texture rotation) will only have an effect if the shader applies receives param_named_auto texture_matrix as input and multiplies that matrix against the UVs to apply these transformations.

Member Typedef Documentation

◆ EffectMap

typedef multimap<TextureEffectType, TextureEffect>::type Ogre::TextureUnitState::EffectMap

Texture effects in a multimap paired array.

Member Enumeration Documentation

◆ BindingType

enum Ogre::TextureUnitState::BindingType

The type of unit to bind the texture settings to.

Enumerator
BT_FRAGMENT	Regular fragment processing unit - the default.
BT_VERTEX	Vertex processing unit - indicates this unit will be used for a vertex texture fetch.
BT_GEOMETRY	Geometry processing unit.
BT_TESSELLATION_HULL	Tessellation control processing unit.
BT_TESSELLATION_DOMAIN	Tessellation evaluation processing unit.

◆ ContentType

enum Ogre::TextureUnitState::ContentType

Enum identifying the type of content this texture unit contains.

Enumerator
CONTENT_NAMED	Normal texture identified by name.
CONTENT_SHADOW	A shadow texture, automatically bound by engine (Deprecated)
CONTENT_COMPOSITOR	A compositor texture, automatically linked to active viewport's chain.

◆ EnvMapType

enum Ogre::TextureUnitState::EnvMapType

Enumeration to specify type of envmap.

Note: Note that these have no effect when using the programmable pipeline, since their effect is overridden by the vertex / fragment programs.

Enumerator
ENV_PLANAR	Envmap based on vector from camera to vertex position, good for planar geometry.
ENV_CURVED	Envmap based on dot of vector from camera to vertex and vertex normal, good for curves.
ENV_REFLECTION	Envmap intended to supply reflection vectors for cube mapping.
ENV_NORMAL	Envmap intended to supply normal vectors for cube mapping.

◆ TextureCubeFace

enum Ogre::TextureUnitState::TextureCubeFace

Enum identifying the frame indexes for faces of a cube map (not the composite 3D type.

Enumerator
CUBE_FRONT
CUBE_BACK
CUBE_LEFT
CUBE_RIGHT
CUBE_UP
CUBE_DOWN

◆ TextureEffectType

enum Ogre::TextureUnitState::TextureEffectType

Definition of the broad types of texture effect you can apply to a texture unit.

Note: Note that these have no effect when using the programmable pipeline, since their effect is overridden by the vertex / fragment programs.

Enumerator
ET_ENVIRONMENT_MAP	Generate all texture coords based on angle between camera and vertex.
ET_PROJECTIVE_TEXTURE	Generate texture coords based on a frustum.
ET_UVSCROLL	Constant u/v scrolling effect.
ET_USCROLL	Constant u scrolling effect.
ET_VSCROLL	Constant u/v scrolling effect.
ET_ROTATE	Constant rotation.
ET_TRANSFORM	More complex transform.

◆ TextureTransformType

enum Ogre::TextureUnitState::TextureTransformType

Useful enumeration when dealing with procedural transforms.

Note: Note that these have no effect when using the programmable pipeline, since their effect is overridden by the vertex / fragment programs.

Enumerator
TT_TRANSLATE_U
TT_TRANSLATE_V
TT_SCALE_U
TT_SCALE_V
TT_ROTATE

Constructor & Destructor Documentation

◆ TextureUnitState() [1/3]

Ogre::TextureUnitState::TextureUnitState ( Pass * parent )

Default constructor.

◆ TextureUnitState() [2/3]

Ogre::TextureUnitState::TextureUnitState	(	Pass *	parent,
		const TextureUnitState &	oth
	)

◆ ~TextureUnitState()

Ogre::TextureUnitState::~TextureUnitState ( )

override

Default destructor.

◆ TextureUnitState() [3/3]

Ogre::TextureUnitState::TextureUnitState	(	Pass *	parent,
		const String &	texName
	)

Name-based constructor.

Parameters

texName The basic name of the texture e.g. brickwall.jpg, stonefloor.png.

Member Function Documentation

◆ _getAnimController()

Controller<Real>* Ogre::TextureUnitState::_getAnimController ( ) const

inline

Gets the animation controller (as created because of setAnimatedTexture) if it exists.

◆ _getTexturePtr() [1/2]

TextureGpu* Ogre::TextureUnitState::_getTexturePtr ( ) const

Get the texture pointer for the current frame.

◆ _getTexturePtr() [2/2]

TextureGpu* Ogre::TextureUnitState::_getTexturePtr ( size_t frame ) const

Get the texture pointer for a given frame.

◆ _load()

void Ogre::TextureUnitState::_load ( )

Internal method for loading this object as part of Material::load.

◆ _notifyParent()

void Ogre::TextureUnitState::_notifyParent ( Pass * parent )

Notify this object that its parent has changed.

◆ _prepare()

void Ogre::TextureUnitState::_prepare ( )

Internal method for preparing this object for load, as part of Material::prepare.

◆ _setSamplerblock()

void Ogre::TextureUnitState::_setSamplerblock ( const HlmsSamplerblock * samplerblock )

Changes the current samplerblock for a new one.

MUST'VE BEEN CREATED VIA HlmsManager!!! INCREASES THE REFERENCE COUNT OF THE SAMPLERBLOCK

◆ _setTexturePtr() [1/2]

void Ogre::TextureUnitState::_setTexturePtr ( TextureGpu * texptr )

Set the texture pointer for the current frame (internal use only!).

◆ _setTexturePtr() [2/2]

void Ogre::TextureUnitState::_setTexturePtr	(	TextureGpu *	texptr,
		size_t	frame
	)

Set the texture pointer for a given frame (internal use only!).

◆ _unload()

void Ogre::TextureUnitState::_unload ( )

Internal method for unloading this object as part of Material::unload.

◆ _unprepare()

void Ogre::TextureUnitState::_unprepare ( )

Internal method for undoing the preparation this object as part of Material::unprepare.

◆ addEffect()

void Ogre::TextureUnitState::addEffect ( TextureEffect & effect )

Generic method for setting up texture effects.

Remarks: Allows you to specify effects directly by using the TextureEffectType enumeration. The arguments that go with it depend on the effect type. Only one effect of each type can be applied to a texture layer.

: This method is used internally by Ogre but it is better generally for applications to use the more intuitive specialised methods such as setEnvironmentMap and setScroll.

Note: This option has no effect in the programmable pipeline.

◆ addFrameTextureName()

void Ogre::TextureUnitState::addFrameTextureName ( const String & name )

Add a Texture name to the end of the frame container.

Parameters

name	The name of the texture.

◆ applyTextureAliases()

bool Ogre::TextureUnitState::applyTextureAliases	(	const AliasTextureNamePairList &	aliasList,
		const bool	apply = `true`
	)

Applies texture names to Texture Unit State with matching texture name aliases.

If no matching aliases are found then the TUS state does not change.

Remarks: Cubic, 1d, 2d, and 3d textures are determined from current state of the Texture Unit. Assumes animated frames are sequentially numbered in the name. If matching texture aliases are found then true is returned.

Parameters

aliasList	A map container of texture alias, texture name pairs.
apply	Set `true` to apply the texture aliases else just test to see if texture alias matches are found.

Returns: True if matching texture aliases were found in the Texture Unit State.

◆ calculateSize()

size_t Ogre::TextureUnitState::calculateSize ( ) const

◆ deleteFrameTextureName()

void Ogre::TextureUnitState::deleteFrameTextureName ( const size_t frameNumber )

Deletes a specific texture frame.

The texture used is not deleted but the texture will no longer be used by the Texture Unit. An exception is raised if the frame number exceeds the number of actual frames.

Parameters

frameNumber The frame number of the texture to be deleted.

◆ getAlphaBlendMode()

const LayerBlendModeEx& Ogre::TextureUnitState::getAlphaBlendMode ( ) const

Get multitexturing alpha blending mode.

◆ getAnimationDuration()

Real Ogre::TextureUnitState::getAnimationDuration ( ) const

Get the animated-texture animation duration.

◆ getAutomaticBatching()

bool Ogre::TextureUnitState::getAutomaticBatching ( ) const

◆ getBindingType()

BindingType Ogre::TextureUnitState::getBindingType ( ) const

Gets the type of unit these texture settings should be bound to.

◆ getColourBlendFallbackDest()

SceneBlendFactor Ogre::TextureUnitState::getColourBlendFallbackDest ( ) const

Get the multipass fallback for colour blending operation destination factor.

◆ getColourBlendFallbackSrc()

SceneBlendFactor Ogre::TextureUnitState::getColourBlendFallbackSrc ( ) const

Get the multipass fallback for colour blending operation source factor.

◆ getColourBlendMode()

const LayerBlendModeEx& Ogre::TextureUnitState::getColourBlendMode ( ) const

Get multitexturing colour blending mode.

◆ getContentType()

ContentType Ogre::TextureUnitState::getContentType ( ) const

Get the type of content this TextureUnitState references.

◆ getCurrentFrame()

unsigned int Ogre::TextureUnitState::getCurrentFrame ( ) const

Gets the active frame in an animated or multi-image texture layer.

◆ getEffects()

const EffectMap& Ogre::TextureUnitState::getEffects ( ) const

Get texture effects in a multimap paired array.

◆ getFrameTextureName()

const String& Ogre::TextureUnitState::getFrameTextureName ( unsigned int frameNumber ) const

Gets the name of the texture associated with a frame number.

Throws an exception if frameNumber exceeds the number of stored frames.

◆ getGamma()

Real Ogre::TextureUnitState::getGamma ( ) const

inline

◆ getIsAlpha()

bool Ogre::TextureUnitState::getIsAlpha ( ) const

Gets whether this texture is requested to be loaded as alpha if single channel.

◆ getName()

const String& Ogre::TextureUnitState::getName ( ) const

inline

Get the name of the Texture Unit State.

◆ getNumFrames()

unsigned int Ogre::TextureUnitState::getNumFrames ( ) const

Gets the number of frames for a texture.

◆ getNumMipmaps()

int Ogre::TextureUnitState::getNumMipmaps ( ) const

Gets how many mipmaps have been requested for the texture.

◆ getParent()

Pass* Ogre::TextureUnitState::getParent ( ) const

inline

Gets the parent Pass object.

◆ getReferencedTextureName()

IdString Ogre::TextureUnitState::getReferencedTextureName ( ) const

inline

Gets the name of the texture in the compositor that this texture references.

◆ getSamplerblock()

const HlmsSamplerblock* Ogre::TextureUnitState::getSamplerblock ( ) const

Retrieves current samplerblock.

Don't const_cast the return value to modify it. See HlmsDatablock remarks.

◆ getTextureDimensions()

std::pair<size_t, size_t> Ogre::TextureUnitState::getTextureDimensions ( unsigned int frame = 0 ) const

Returns the width and height of the texture in the given frame.

◆ getTextureName()

const String& Ogre::TextureUnitState::getTextureName ( ) const

Get the name of current texture image for this layer.

Remarks: This will either always be a single name for this layer, or will be the name of the current frame for an animated or otherwise multi-frame texture.

◆ getTextureNameAlias()

const String& Ogre::TextureUnitState::getTextureNameAlias ( ) const

inline

Gets the Texture Name Alias of the Texture Unit.

◆ getTextureRotate()

const Radian& Ogre::TextureUnitState::getTextureRotate ( ) const

Get texture rotation effects angle value.

◆ getTextureTransform()

const Matrix4& Ogre::TextureUnitState::getTextureTransform ( ) const

Gets the current texture transformation matrix.

Remarks: Causes a reclaculation of the matrix if any parameters have been changed via setTextureScroll, setTextureScale and setTextureRotate.

Note: Has no effect in the programmable pipeline.

◆ getTextureType()

TextureTypes::TextureTypes Ogre::TextureUnitState::getTextureType ( ) const

Returns the type of this texture.

◆ getTextureUScale()

Real Ogre::TextureUnitState::getTextureUScale ( ) const

Get texture uscale value.

◆ getTextureUScroll()

Real Ogre::TextureUnitState::getTextureUScroll ( ) const

Get texture uscroll value.

◆ getTextureVScale()

Real Ogre::TextureUnitState::getTextureVScale ( ) const

Get texture vscale value.

◆ getTextureVScroll()

Real Ogre::TextureUnitState::getTextureVScroll ( ) const

Get texture vscroll value.

◆ hasViewRelativeTextureCoordinateGeneration()

bool Ogre::TextureUnitState::hasViewRelativeTextureCoordinateGeneration ( ) const

Returns whether this unit has texture coordinate generation that depends on the camera.

◆ is3D()

bool Ogre::TextureUnitState::is3D ( ) const

Returns true if this texture layer uses a composite 3D cubic texture.

◆ isBlank()

bool Ogre::TextureUnitState::isBlank ( ) const

Determines if this texture layer is currently blank.

Note: This can happen if a texture fails to load or some other non-fatal error. Worth checking after setting texture name.

◆ isCubic()

bool Ogre::TextureUnitState::isCubic ( ) const

Returns true if this texture unit is either a series of 6 2D textures, each in it's own frame, or is a full 3D cube map.

You can tell which by checking getTextureType.

◆ isHardwareGammaEnabled()

bool Ogre::TextureUnitState::isHardwareGammaEnabled ( ) const

◆ isLoaded()

bool Ogre::TextureUnitState::isLoaded ( ) const

Is this loaded?

◆ isTextureLoadFailing()

bool Ogre::TextureUnitState::isTextureLoadFailing ( ) const

inline

Tests if the texture associated with this unit has failed to load.

◆ operator=()

TextureUnitState& Ogre::TextureUnitState::operator= ( const TextureUnitState & oth )

◆ removeAllEffects()

void Ogre::TextureUnitState::removeAllEffects ( )

Removes all effects applied to this texture layer.

◆ removeEffect()

void Ogre::TextureUnitState::removeEffect ( const TextureEffectType type )

Removes a single effect applied to this texture layer.

Note: Because you can only have 1 effect of each type (e.g. 1 texture coordinate generation) applied to a layer, only the effect type is required.

◆ retryTextureLoad()

void Ogre::TextureUnitState::retryTextureLoad ( )

inline

Tells the unit to retry loading the texture if it had failed to load.

◆ setAlphaOperation()

void Ogre::TextureUnitState::setAlphaOperation	(	LayerBlendOperationEx	op,
		LayerBlendSource	source1 = `LBS_TEXTURE`,
		LayerBlendSource	source2 = `LBS_CURRENT`,
		Real	arg1 = `1.0`,
		Real	arg2 = `1.0`,
		Real	manualBlend = `0.0`
	)

Sets the alpha operation to be applied to this texture.

Remarks: This works in exactly the same way as setColourOperation, except that the effect is applied to the level of alpha (i.e. transparency) of the texture rather than its colour. When the alpha of a texel (a pixel on a texture) is 1.0, it is opaque, whereas it is fully transparent if the alpha is 0.0. Please refer to the setColourOperation method for more info.

Parameters

op	The operation to be used, e.g. modulate (multiply), add, subtract
source1	The source of the first alpha value to the operation e.g. texture alpha
source2	The source of the second alpha value to the operation e.g. current surface alpha
arg1	Manually supplied alpha value (only required if source1 = LBS_MANUAL)
arg2	Manually supplied alpha value (only required if source2 = LBS_MANUAL)
manualBlend	Manually supplied 'blend' value - only required for operations which require manual blend e.g. LBX_BLEND_MANUAL

See also: setColourOperation

Note: This option has no effect in the programmable pipeline.

◆ setAnimatedTextureName() [1/2]

void Ogre::TextureUnitState::setAnimatedTextureName	(	const String &	name,
		unsigned int	numFrames,
		Real	duration = `0`
	)

Sets the names of the texture images for an animated texture.

Remarks: Animated textures are just a series of images making up the frames of the animation. All the images must be the same size, and their names must have a frame number appended before the extension, e.g. if you specify a name of "wall.jpg" with 3 frames, the image names must be "wall_0.jpg", "wall_1.jpg" and "wall_2.jpg".

: You can change the active frame on a texture layer by calling the setCurrentFrame method.

Note: If you can't make your texture images conform to the naming standard laid out here, you can call the alternative setAnimatedTextureName method which takes an array of names instead.

Parameters

name	The base name of the textures to use e.g. wall.jpg for frames wall_0.jpg, wall_1.jpg etc.
numFrames	The number of frames in the sequence.
duration	The length of time it takes to display the whole animation sequence, in seconds. If 0, no automatic transition occurs.

◆ setAnimatedTextureName() [2/2]

void Ogre::TextureUnitState::setAnimatedTextureName	(	const String *const	names,
		unsigned int	numFrames,
		Real	duration = `0`
	)

Sets the names of the texture images for an animated texture.

Remarks: This an alternative method to the one where you specify a single name and let the system derive the names of each frame, incase your images can't conform to this naming standard.

: Animated textures are just a series of images making up the frames of the animation. All the images must be the same size, and you must provide their names as an array in the first parameter. You can change the active frame on a texture layer by calling the setCurrentFrame method.

Note: If you can make your texture images conform to a naming standard of basicName_frame.ext, you can call the alternative setAnimatedTextureName method which just takes a base name instead.

Parameters

names	Pointer to array of names of the textures to use, in frame order.
numFrames	The number of frames in the sequence.
duration	The length of time it takes to display the whole animation sequence, in seconds. If 0, no automatic transition occurs.

◆ setAutomaticBatching()

void Ogre::TextureUnitState::setAutomaticBatching ( bool automaticBatching )

When a texture is used by both PBS datablocks and V1 materials it can lead to a few issues:

V1 materials will often expect a Type2D texture to actually be Type2D.
PBS datablocks will use TextureFlags::AutomaticBatching to group several textures of same resolution and format into the same Type2DArray, and thus lower CPU overhead. This means the 2D texture is not actually Type2D, but rather Type2DArray, and the slice information is also required.
The default is to disable this option, which means the texture may be loaded twice: one for V1 materials, and another for PBS. If you do not want this, call setAutomaticBatching( true ); before loading the texture. Note that you will have to provide the slice index by hand and make sure the shader you wrote understands this is a 2D Array texture.

Parameters

automaticBatching

◆ setBindingType()

void Ogre::TextureUnitState::setBindingType ( BindingType bt )

Sets the type of unit these texture settings should be bound to.

Remarks: Some render systems, when implementing vertex texture fetch, separate the binding of textures for use in the vertex program versus those used in fragment programs. This setting allows you to target the vertex processing unit with a texture binding, in those cases. For rendersystems which have a unified binding for the vertex and fragment units, this setting makes no difference.

◆ setBlank()

void Ogre::TextureUnitState::setBlank ( )

Sets this texture layer to be blank.

◆ setColourOperation()

void Ogre::TextureUnitState::setColourOperation ( const LayerBlendOperation op )

Determines how this texture layer is combined with the one below it (or the diffuse colour of the geometry if this is layer 0).

Remarks: This method is the simplest way to blend tetxure layers, because it requires only one parameter, gives you the most common blending types, and automatically sets up 2 blending methods: one for if single-pass multitexturing hardware is available, and another for if it is not and the blending must be achieved through multiple rendering passes. It is, however, quite limited and does not expose the more flexible multitexturing operations, simply because these can't be automatically supported in multipass fallback mode. If want to use the fancier options, use TextureUnitState::setColourOperationEx, but you'll either have to be sure that enough multitexturing units will be available, or you should explicitly set a fallback using TextureUnitState::setColourOpMultipassFallback.

Note: The default method is LBO_MODULATE for all layers.; This option has no effect in the programmable pipeline.

Parameters

op	One of the LayerBlendOperation enumerated blending types.

◆ setColourOperationEx()

void Ogre::TextureUnitState::setColourOperationEx	(	LayerBlendOperationEx	op,
		LayerBlendSource	source1 = `LBS_TEXTURE`,
		LayerBlendSource	source2 = `LBS_CURRENT`,
		const ColourValue &	arg1 = `ColourValue::White`,
		const ColourValue &	arg2 = `ColourValue::White`,
		Real	manualBlend = `0.0`
	)

Setting advanced blending options.

Remarks: This is an extended version of the TextureUnitState::setColourOperation method which allows extremely detailed control over the blending applied between this and earlier layers. See the IMPORTANT note below about the issues between mulitpass and multitexturing that using this method can create.

: Texture colour operations determine how the final colour of the surface appears when rendered. Texture units are used to combine colour values from various sources (ie. the diffuse colour of the surface from lighting calculations, combined with the colour of the texture). This method allows you to specify the 'operation' to be used, ie. the calculation such as adds or multiplies, and which values to use as arguments, such as a fixed value or a value from a previous calculation.

The defaults for each layer are:

op = LBX_MODULATE
source1 = LBS_TEXTURE
source2 = LBS_CURRENT

ie. each layer takes the colour results of the previous layer, and multiplies them with the new texture being applied. Bear in mind that colours are RGB values from 0.0 - 1.0 so multiplying them together will result in values in the same range, 'tinted' by the multiply. Note however that a straight multiply normally has the effect of darkening the textures - for this reason there are brightening operations like LBO_MODULATE_X2. See the LayerBlendOperation and LayerBlendSource enumerated types for full details.

Note: Because of the limitations on some underlying APIs (Direct3D included) the LBS_TEXTURE argument can only be used as the first argument, not the second.

: The final 3 parameters are only required if you decide to pass values manually into the operation, i.e. you want one or more of the inputs to the colour calculation to come from a fixed value that you supply. Hence you only need to fill these in if you supply LBS_MANUAL to the corresponding source, or use the LBX_BLEND_MANUAL operation.

Warning: Ogre tries to use multitexturing hardware to blend texture layers together. However, if it runs out of texturing units (e.g. 2 of a GeForce2, 4 on a GeForce3) it has to fall back on multipass rendering, i.e. rendering the same object multiple times with different textures. This is both less efficient and there is a smaller range of blending operations which can be performed. For this reason, if you use this method you MUST also call TextureUnitState::setColourOpMultipassFallback to specify which effect you want to fall back on if sufficient hardware is not available.

Note: This has no effect in the programmable pipeline.

: If you wish to avoid having to do this, use the simpler TextureUnitState::setColourOperation method which allows less flexible blending options but sets up the multipass fallback automatically, since it only allows operations which have direct multipass equivalents.

Parameters

op	The operation to be used, e.g. modulate (multiply), add, subtract.
source1	The source of the first colour to the operation e.g. texture colour.
source2	The source of the second colour to the operation e.g. current surface colour.
arg1	Manually supplied colour value (only required if source1 = LBS_MANUAL).
arg2	Manually supplied colour value (only required if source2 = LBS_MANUAL).
manualBlend	Manually supplied 'blend' value - only required for operations which require manual blend e.g. LBX_BLEND_MANUAL.

◆ setColourOpMultipassFallback()

void Ogre::TextureUnitState::setColourOpMultipassFallback	(	const SceneBlendFactor	sourceFactor,
		const SceneBlendFactor	destFactor
	)

Sets the multipass fallback operation for this layer, if you used TextureUnitState::setColourOperationEx and not enough multitexturing hardware is available.

Remarks: Because some effects exposed using TextureUnitState::setColourOperationEx are only supported under multitexturing hardware, if the hardware is lacking the system must fallback on multipass rendering, which unfortunately doesn't support as many effects. This method is for you to specify the fallback operation which most suits you.

: You'll notice that the interface is the same as the Material::setSceneBlending method; this is because multipass rendering IS effectively scene blending, since each layer is rendered on top of the last using the same mechanism as making an object transparent, it's just being rendered in the same place repeatedly to get the multitexture effect.

: If you use the simpler (and hence less flexible) TextureUnitState::setColourOperation method you don't need to call this as the system sets up the fallback for you.

Note: This option has no effect in the programmable pipeline, because there is no multipass fallback and multitexture blending is handled by the fragment shader.

◆ setCompositorReference()

void Ogre::TextureUnitState::setCompositorReference ( const String & textureName )

Set the compositor reference for this texture unit state.

Remarks: Only valid when content type is compositor.

Parameters

textureName The name of the texture to reference.

◆ setContentType()

void Ogre::TextureUnitState::setContentType ( ContentType ct )

Set the type of content this TextureUnitState references.

Remarks: The default is to reference a standard named texture, but this unit can also reference automated content like a shadow texture.

◆ setCubicTexture()

void Ogre::TextureUnitState::setCubicTexture	(	TextureGpu const	texPtrs,
		bool	forUVW = `false`
	)

Sets this texture layer to use a combination of 6 texture maps, each one relating to a face of a cube.

Remarks: Cubic textures are made up of 6 separate texture images. Each one of these is an orthogonal view of the world with a FOV of 90 degrees and an aspect ratio of 1:1. You can generate these from 3D Studio by rendering a scene to a reflection map of a transparent cube and saving the output files.

Cubic maps can be used either for skyboxes (complete wrap-around skies, like space) or as environment maps to simulate reflections. The system deals with these 2 scenarios in different ways:

for cubic environment maps, the 6 textures are combined into a single 'cubic' texture map which is then addressed using 3D texture coordinates. This is required because you don't know what face of the box you're going to need to address when you render an object, and typically you need to reflect more than one face on the one object, so all 6 textures are needed to be 'active' at once. Cubic environment maps are enabled by calling this method with the forUVW parameter set to true, and then calling setEnvironmentMap(true).

Note that not all cards support cubic environment mapping.
for skyboxes, the 6 textures are kept separate and used independently for each face of the skybox. This is done because not all cards support 3D cubic maps and skyboxes do not need to use 3D texture coordinates so it is simpler to render each face of the box with 2D coordinates, changing texture between faces.

Skyboxes are created by calling SceneManager::setSkyBox.

Parameters

texPtrs	The 6 pointers to the textures which make up the 6 sides of the box. The textures must all be the same size and be powers of 2 in width & height. Must be an Ogre::TextureGpu array with a length of 6 unless forUVW is set to `true`.
forUVW	Set to `true` if you want a single 3D texture addressable with 3D texture coordinates rather than 6 separate textures. Useful for cubic environment mapping.

◆ setCubicTextureName() [1/2]

void Ogre::TextureUnitState::setCubicTextureName	(	const String &	name,
		bool	forUVW = `false`
	)

Sets this texture layer to use a combination of 6 texture maps, each one relating to a face of a cube.

Remarks: Cubic textures are made up of 6 separate texture images. Each one of these is an orthogonal view of the world with a FOV of 90 degrees and an aspect ratio of 1:1. You can generate these from 3D Studio by rendering a scene to a reflection map of a transparent cube and saving the output files.

Cubic maps can be used either for skyboxes (complete wrap-around skies, like space) or as environment maps to simulate reflections. The system deals with these 2 scenarios in different ways:

for cubic environment maps, the 6 textures are combined into a single 'cubic' texture map which is then addressed using 3D texture coordinates. This is required because you don't know what face of the box you're going to need to address when you render an object, and typically you need to reflect more than one face on the one object, so all 6 textures are needed to be 'active' at once. Cubic environment maps are enabled by calling this method with the forUVW parameter set to true, and then calling setEnvironmentMap(true).

Note that not all cards support cubic environment mapping.
for skyboxes, the 6 textures are kept separate and used independently for each face of the skybox. This is done because not all cards support 3D cubic maps and skyboxes do not need to use 3D texture coordinates so it is simpler to render each face of the box with 2D coordinates, changing texture between faces.

Skyboxes are created by calling SceneManager::setSkyBox.

Parameters

name The basic name of the texture e.g. brickwall.jpg, stonefloor.png. There must be 6 versions of this texture with the suffixes _fr, _bk, _up, _dn, _lf, and _rt (before the extension) which make up the 6 sides of the box. The textures must all be the same size and be powers of 2 in width & height. If you can't make your texture names conform to this, use the alternative method of the same name which takes an array of texture names instead.

forUVW Set to true if you want a single 3D texture addressable with 3D texture coordinates rather than 6 separate textures. Useful for cubic environment mapping.

◆ setCubicTextureName() [2/2]

void Ogre::TextureUnitState::setCubicTextureName	(	const String *const	names,
		bool	forUVW = `false`
	)

Sets this texture layer to use a combination of 6 texture maps, each one relating to a face of a cube.

Remarks: Cubic textures are made up of 6 separate texture images. Each one of these is an orthogonal view of the world with a FOV of 90 degrees and an aspect ratio of 1:1. You can generate these from 3D Studio by rendering a scene to a reflection map of a transparent cube and saving the output files.

Cubic maps can be used either for skyboxes (complete wrap-around skies, like space) or as environment maps to simulate reflections. The system deals with these 2 scenarios in different ways:

For cubic environment maps, the 6 textures are combined into a single 'cubic' texture map which is then addressed using 3D texture coordinates. This is required because you don't know what face of the box you're going to need to address when you render an object, and typically you need to reflect more than one face on the one object, so all 6 textures are needed to be 'active' at once. Cubic environment maps are enabled by calling this method with the forUVW parameter set to true, and then calling setEnvironmentMap(true).

Note that not all cards support cubic environment mapping.
For skyboxes, the 6 textures are kept separate and used independently for each face of the skybox. This is done because not all cards support 3D cubic maps and skyboxes do not need to use 3D texture coordinates so it is simpler to render each face of the box with 2D coordinates, changing texture between faces.

Skyboxes are created by calling SceneManager::setSkyBox.

Parameters

names	The 6 names of the textures which make up the 6 sides of the box. The textures must all be the same size and be powers of 2 in width & height. Must be an Ogre::String array with a length of 6 unless forUVW is set to `true`.
forUVW	Set to `true` if you want a single 3D texture addressable with 3D texture coordinates rather than 6 separate textures. Useful for cubic environment mapping.

◆ setCurrentFrame()

void Ogre::TextureUnitState::setCurrentFrame ( unsigned int frameNumber )

Changes the active frame in an animated or multi-image texture.

Remarks: An animated texture (or a cubic texture where the images are not combined for 3D use) is made up of a number of frames. This method sets the active frame.

◆ setEnvironmentMap()

void Ogre::TextureUnitState::setEnvironmentMap	(	bool	enable,
		EnvMapType	envMapType = `ENV_CURVED`
	)

Turns on/off texture coordinate effect that makes this layer an environment map.

Remarks: Environment maps make an object look reflective by using the object's vertex normals relative to the camera view to generate texture coordinates.

: The vectors generated can either be used to address a single 2D texture which is a 'fish-eye' lens view of a scene, or a 3D cubic environment map which requires 6 textures for each side of the inside of a cube. The type depends on what texture you set up - if you use the setTextureName method then a 2D fisheye lens texture is required, whereas if you used setCubicTextureName then a cubic environment map will be used.

: This effect works best if the object has lots of gradually changing normals. The texture also has to be designed for this effect - see the example spheremap.png included with the sample application for a 2D environment map; a cubic map can be generated by rendering 6 views of a scene to each of the cube faces with orthogonal views.

Note: Enabling this disables any other texture coordinate generation effects. However it can be combined with texture coordinate modification functions, which then operate on the generated coordinates rather than static model texture coordinates.

Parameters

enable	True to enable, false to disable
envMapType	The type of environment mapping to perform. Planar, curved, reflection or normal.

See also: EnvMapType

Note: This option has no effect in the programmable pipeline.

◆ setFrameTextureName()

void Ogre::TextureUnitState::setFrameTextureName	(	const String &	name,
		unsigned int	frameNumber
	)

Sets the name of the texture associated with a frame.

Parameters

name	The name of the texture.
frameNumber	The frame the texture name is to be placed in.

Note: Throws an exception if frameNumber exceeds the number of stored frames.

◆ setGamma()

void Ogre::TextureUnitState::setGamma ( Real gamma )

inline

◆ setHardwareGammaEnabled()

void Ogre::TextureUnitState::setHardwareGammaEnabled ( bool enabled )

◆ setIsAlpha()

void Ogre::TextureUnitState::setIsAlpha ( bool isAlpha )

Sets whether this texture is requested to be loaded as alpha if single channel.

◆ setName()

void Ogre::TextureUnitState::setName ( const String & name )

Set the name of the Texture Unit State.

Remarks: The name of the Texture Unit State is optional. Its useful in material scripts where a material could inherit from another material and only want to modify a particalar Texture Unit State.

◆ setNumMipmaps()

void Ogre::TextureUnitState::setNumMipmaps ( int numMipmaps )

Sets how many mipmaps have been requested for the texture.

◆ setProjectiveTexturing()

void Ogre::TextureUnitState::setProjectiveTexturing	(	bool	enabled,
		const Frustum *	projectionSettings = `0`
	)

Enables or disables projective texturing on this texture unit.

Remarks: Projective texturing allows you to generate texture coordinates based on a Frustum, which gives the impression that a texture is being projected onto the surface. Note that once you have called this method, the texture unit continues to monitor the Frustum you passed in and the projection will change if you can alter it. It also means that you must ensure that the Frustum object you pass a pointer to remains in existence for as long as this TextureUnitState does.

: This effect cannot be combined with other texture generation effects, such as environment mapping. It also has no effect on passes which have a vertex program enabled - projective texturing has to be done in the vertex program instead.

Parameters

enabled	Whether to enable / disable.
projectionSettings	The Frustum which will be used to derive the projection parameters.

◆ setRotateAnimation()

void Ogre::TextureUnitState::setRotateAnimation ( Real speed )

Sets up an animated texture rotation for this layer.

Note: Useful for constant rotations (for varying rotations, see setTransformAnimation).

Parameters

speed The number of complete anticlockwise revolutions per second (use -ve for clockwise)

Note: This option has no effect in the programmable pipeline.

◆ setSamplerblock()

void Ogre::TextureUnitState::setSamplerblock ( const HlmsSamplerblock & samplerblock )

Changes the current samplerblock for a new one.

◆ setScrollAnimation()

void Ogre::TextureUnitState::setScrollAnimation	(	Real	uSpeed,
		Real	vSpeed
	)

Sets up an animated scroll for the texture layer.

Note: Useful for creating constant scrolling effects on a texture layer (for varying scrolls, see setTransformAnimation).

Parameters

uSpeed	The number of horizontal loops per second (+ve=moving right, -ve = moving left).
vSpeed	The number of vertical loops per second (+ve=moving up, -ve= moving down).

Note: This option has no effect in the programmable pipeline.

◆ setTexture()

void Ogre::TextureUnitState::setTexture ( TextureGpu * texPtr )

Sets this texture layer to use a single texture, given the pointer to the texture to use on this layer.

◆ setTextureName()

void Ogre::TextureUnitState::setTextureName	(	const String &	name,
		TextureTypes::TextureTypes	ttype = `TextureTypes::Type2D`
	)

Sets this texture layer to use a single texture, given the name of the texture to use on this layer.

◆ setTextureNameAlias()

void Ogre::TextureUnitState::setTextureNameAlias ( const String & name )

Set the alias name used for texture frame names.

Parameters

name	Can be any sequence of characters and does not have to be unique.

◆ setTextureRotate()

void Ogre::TextureUnitState::setTextureRotate ( const Radian & angle )

Sets the anticlockwise rotation factor applied to texture coordinates.

Remarks: This sets a fixed rotation angle - if you wish to animate this, see the ControllerManager::createTextureRotater method.

Note: Has no effect in the programmable pipeline.

Parameters

angle The angle of rotation (anticlockwise).

◆ setTextureScale()

void Ogre::TextureUnitState::setTextureScale	(	Real	uScale,
		Real	vScale
	)

Sets the scaling factor applied to texture coordinates.

Remarks: This method sets the scale element of the texture transformation, and is easier to use than setTextureTransform if you are combining translation, scaling and rotation in your texture transformation. Again if you want to animate these values you need to use a Controller (see ControllerManager and it's methods for more information).

Note: Has no effect in the programmable pipeline.

Parameters

uScale	The value by which the texture is to be scaled horizontally.
vScale	The value by which the texture is to be scaled vertically.

◆ setTextureScroll()

void Ogre::TextureUnitState::setTextureScroll	(	Real	u,
		Real	v
	)

Sets the translation offset of the texture, ie scrolls the texture.

Remarks: This method sets the translation element of the texture transformation, and is easier to use than setTextureTransform if you are combining translation, scaling and rotation in your texture transformation. Again if you want to animate these values you need to use a Controller

Note: Has no effect in the programmable pipeline.

Parameters

u	The amount the texture should be moved horizontally (u direction).
v	The amount the texture should be moved vertically (v direction).

See also: ControllerManager, Controller

◆ setTextureTransform()

void Ogre::TextureUnitState::setTextureTransform ( const Matrix4 & xform )

Sets a matrix used to transform any texture coordinates on this layer.

Remarks: Texture coordinates can be modified on a texture layer to create effects like scrolling textures. A texture transform can either be applied to a layer which takes the source coordinates from a fixed set in the geometry, or to one which generates them dynamically (e.g. environment mapping).

: It's obviously a bit impractical to create scrolling effects by calling this method manually since you would have to call it every framw with a slight alteration each time, which is tedious. Instead you can use the ControllerManager class to create a Controller object which will manage the effect over time for you. See the ControllerManager::createTextureScroller and it's sibling methods for details.
In addition, if you want to set the individual texture transformations rather than concatenating them yourself, use setTextureScroll, setTextureScale and setTextureRotate.

Note: Has no effect in the programmable pipeline.

◆ setTextureUScale()

void Ogre::TextureUnitState::setTextureUScale ( Real value )

As setTextureScale, but sets only U value.

Note: Has no effect in the programmable pipeline.

◆ setTextureUScroll()

void Ogre::TextureUnitState::setTextureUScroll ( Real value )

As setTextureScroll, but sets only U value.

Note: Has no effect in the programmable pipeline.

◆ setTextureVScale()

void Ogre::TextureUnitState::setTextureVScale ( Real value )

As setTextureScale, but sets only V value.

Note: Has no effect in the programmable pipeline.

◆ setTextureVScroll()

void Ogre::TextureUnitState::setTextureVScroll ( Real value )

As setTextureScroll, but sets only V value.

Note: Has no effect in the programmable pipeline.

◆ setTransformAnimation()

void Ogre::TextureUnitState::setTransformAnimation	(	const TextureTransformType	ttype,
		const WaveformType	waveType,
		Real	base = `0`,
		Real	frequency = `1`,
		Real	phase = `0`,
		Real	amplitude = `1`
	)

Sets up a general time-relative texture modification effect.

Note: This can be called multiple times for different values of ttype, but only the latest effect applies if called multiple time for the same ttype.

Parameters

ttype	The type of transform, either translate (scroll), scale (stretch) or rotate (spin).
waveType	The shape of the wave, see WaveformType enum for details.
base	The base value for the function (range of output = {base, base + amplitude}).
frequency	The speed of the wave in cycles per second.
phase	The offset of the start of the wave, e.g. 0.5 to start half-way through the wave.
amplitude	Scales the output so that instead of lying within 0..1 it lies within 0..1*amplitude for exaggerated effects.

Note: This option has no effect in the programmable pipeline.

The documentation for this class was generated from the following file:

OgreTextureUnitState.h

Classes

Public Types

Public Member Functions

Detailed Description

Member Typedef Documentation

◆ EffectMap

Member Enumeration Documentation

◆ BindingType

◆ ContentType

◆ EnvMapType

◆ TextureCubeFace

◆ TextureEffectType

◆ TextureTransformType

Constructor & Destructor Documentation

◆ TextureUnitState() [1/3]

◆ TextureUnitState() [2/3]

◆ ~TextureUnitState()

◆ TextureUnitState() [3/3]

Member Function Documentation

◆ _getAnimController()

◆ _getTexturePtr() [1/2]

◆ _getTexturePtr() [2/2]

◆ _load()

◆ _notifyParent()

◆ _prepare()

◆ _setSamplerblock()

◆ _setTexturePtr() [1/2]

◆ _setTexturePtr() [2/2]

◆ _unload()

◆ _unprepare()

◆ addEffect()

◆ addFrameTextureName()

◆ applyTextureAliases()

◆ calculateSize()

◆ deleteFrameTextureName()

◆ getAlphaBlendMode()

◆ getAnimationDuration()

◆ getAutomaticBatching()

◆ getBindingType()

◆ getColourBlendFallbackDest()

◆ getColourBlendFallbackSrc()

◆ getColourBlendMode()

◆ getContentType()

◆ getCurrentFrame()

◆ getEffects()

◆ getFrameTextureName()

◆ getGamma()

◆ getIsAlpha()

◆ getName()

◆ getNumFrames()

◆ getNumMipmaps()

◆ getParent()

◆ getReferencedTextureName()

◆ getSamplerblock()

◆ getTextureDimensions()

◆ getTextureName()

◆ getTextureNameAlias()

◆ getTextureRotate()

◆ getTextureTransform()

◆ getTextureType()

◆ getTextureUScale()

◆ getTextureUScroll()

◆ getTextureVScale()

◆ getTextureVScroll()

◆ hasViewRelativeTextureCoordinateGeneration()

◆ is3D()

◆ isBlank()

◆ isCubic()

◆ isHardwareGammaEnabled()

◆ isLoaded()

◆ isTextureLoadFailing()

◆ operator=()

◆ removeAllEffects()

◆ removeEffect()

◆ retryTextureLoad()

◆ setAlphaOperation()

◆ setAnimatedTextureName() [1/2]

◆ setAnimatedTextureName() [2/2]

◆ setAutomaticBatching()

◆ setBindingType()