OGRE  1.11.6
Object-Oriented Graphics Rendering Engine
Ogre::D3D11RenderWindowSwapChainBased Class Referenceabstract

#include <OgreD3D11RenderWindow.h>

+ Inheritance diagram for Ogre::D3D11RenderWindowSwapChainBased:

Public Types

enum  FrameBuffer { FB_FRONT, FB_BACK, FB_AUTO }
 
enum  StatFlags {
  SF_NONE = 0, SF_FPS = 1, SF_AVG_FPS = 2, SF_BEST_FPS = 4,
  SF_WORST_FPS = 8, SF_TRIANGLE_COUNT = 16, SF_ALL = 0xFFFF
}
 

Public Member Functions

 D3D11RenderWindowSwapChainBased (D3D11Device &device)
 
 ~D3D11RenderWindowSwapChainBased ()
 
virtual void _beginUpdate ()
 Method for manual management of rendering : fires 'preRenderTargetUpdate' and initialises statistics etc. More...
 
virtual void _detachDepthBuffer ()
 Detaches DepthBuffer without notifying it from the detach. More...
 
virtual void _endUpdate ()
 Method for manual management of rendering - finishes statistics calculation and fires 'postRenderTargetUpdate'. More...
 
virtual Impl_getImpl ()
 Get rendersystem specific interface for this RenderTarget. More...
 
IDXGISwapChainN * _getSwapChain ()
 Get the swapchain details. More...
 
DXGI_SWAP_CHAIN_DESC_N * _getSwapChainDescription (void)
 
virtual void _notifyCameraRemoved (const Camera *cam)
 Utility method to notify a render target that a camera has been removed, incase it was referring to it as a viewer. More...
 
virtual bool _shouldRebindBackBuffer ()
 
virtual void _updateAutoUpdatedViewports (bool updateStatistics=true)
 Method for manual management of rendering - renders only viewports that are auto updated. More...
 
virtual void _updateViewport (int zorder, bool updateStatistics=true)
 Method for manual management of rendering - renders the given viewport (even if it is not autoupdated) More...
 
virtual void _updateViewport (Viewport *viewport, bool updateStatistics=true)
 Method for manual management of rendering - renders the given viewport (even if it is not autoupdated) More...
 
void _validateStereo ()
 Validate the type of stereo that is enabled for this window. More...
 
virtual void addListener (RenderTargetListener *listener)
 Add a listener to this RenderTarget which will be called back before & after rendering. More...
 
virtual ViewportaddViewport (Camera *cam, int ZOrder=0, float left=0.0f, float top=0.0f, float width=1.0f, float height=1.0f)
 Adds a viewport to the rendering target. More...
 
virtual bool attachDepthBuffer (DepthBuffer *depthBuffer)
 
virtual void copyContentsToMemory (const Box &src, const PixelBox &dst, FrameBuffer buffer)
 Overridden - see RenderTarget. More...
 
void copyContentsToMemory (const PixelBox &dst, FrameBuffer buffer=FB_AUTO)
 This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts. More...
 
virtual void create (const String &name, unsigned widthPt, unsigned heightPt, bool fullScreen, const NameValuePairList *miscParams)
 
virtual void create (const String &name, unsigned int widthPt, unsigned int heightPt, bool fullScreen, const NameValuePairList *miscParams)=0
 Creates & displays the new window. More...
 
virtual void destroy (void)
 Destroys the window. More...
 
virtual void detachDepthBuffer ()
 
virtual uint32 getColourDepth (void) const
 
void getCustomAttribute (const String &name, void *pData)
 Retrieve a platform or API-specific piece of information. More...
 
uint getCustomAttribute (const String &name)
 simplified API for bindings More...
 
DepthBuffergetDepthBuffer () const
 
uint16 getDepthBufferPool () const
 
virtual uint getFSAA () const
 Indicates whether multisampling is performed on rendering and at what level. More...
 
virtual const StringgetFSAAHint () const
 Gets the FSAA hint (. More...
 
virtual uint32 getHeight (void) const
 
virtual void getMetrics (unsigned int &width, unsigned int &height, unsigned int &colourDepth)
 Retrieve information about the render target. More...
 
virtual void getMetrics (unsigned int &width, unsigned int &height, unsigned int &colourDepth, int &left, int &top) const
 Overloaded version of getMetrics from RenderTarget, including extra details specific to windowing systems. More...
 
virtual const StringgetName (void) const
 Retrieve target's name. More...
 
virtual unsigned short getNumViewports (void) const
 Returns the number of viewports attached to this target. More...
 
virtual uchar getPriority () const
 Gets the priority of a render target. More...
 
const FrameStatsgetStatistics (void) const
 Retieves details of current rendering performance. More...
 
virtual float getViewPointToPixelScale ()
 Many windowing systems that support HiDPI displays use special points to specify size of the windows and controls, so that windows and controls with hardcoded sizes does not become too small on HiDPI displays. More...
 
virtual ViewportgetViewport (unsigned short index)
 Retrieves a pointer to the viewport with the given index. More...
 
virtual ViewportgetViewportByZOrder (int ZOrder)
 Retrieves a pointer to the viewport with the given Z-order. More...
 
unsigned getVSyncInterval () const
 Returns the vertical sync interval. More...
 
virtual uint32 getWidth (void) const
 
virtual bool hasViewportWithZOrder (int ZOrder)
 Returns true if and only if a viewport exists at the given Z-order. More...
 
virtual void insertListener (RenderTargetListener *listener, const unsigned int pos=0)
 same as addListener, but force the position in the vector, so we can control the call order More...
 
virtual bool isActive (void) const
 Overridden from RenderTarget, flags invisible windows as inactive. More...
 
virtual bool isAutoUpdated (void) const
 Gets whether this target is automatically updated if Ogre's rendering loop or Root::_updateAllRenderTargets is being used. More...
 
bool isClosed () const
 Indicates whether the window has been closed by the user. More...
 
bool isDeactivatedOnFocusChange () const
 Returns true if the window will automatically de-activate itself when it loses focus. More...
 
virtual bool isFullScreen (void) const
 Returns true if window is running in fullscreen mode. More...
 
virtual bool isHardwareGammaEnabled () const
 Indicates whether on rendering, linear colour space is converted to sRGB gamma colour space. More...
 
bool isHidden () const
 Indicates whether the window was set to hidden (not displayed) More...
 
virtual bool isPrimary (void) const
 Indicates whether the window is the primary window. More...
 
virtual bool isStereoEnabled (void) const
 Indicates whether stereo is currently enabled for this target. More...
 
virtual bool isVisible (void) const
 Indicates whether the window is visible (not minimized or obscured) More...
 
bool isVSyncEnabled () const
 Indicates whether vertical sync is activated for the window. More...
 
virtual void removeAllListeners (void)
 Removes all listeners from this instance. More...
 
virtual void removeAllViewports (void)
 Removes all viewports on this target. More...
 
virtual void removeListener (RenderTargetListener *listener)
 Removes a RenderTargetListener previously registered using addListener. More...
 
virtual void removeViewport (int ZOrder)
 Removes a viewport at a given Z-order. More...
 
void reposition (int left, int top)
 Reposition the window. More...
 
bool requiresTextureFlipping () const
 
void resetStatistics (void)
 Resets saved frame-rate statistices. More...
 
void resize (unsigned int width, unsigned int height)
 Alter the size of the window. More...
 
virtual void setActive (bool state)
 Used to set the active state of the render target. More...
 
virtual void setAutoUpdated (bool autoupdate)
 Sets whether this target should be automatically updated if Ogre's rendering loop or Root::_updateAllRenderTargets is being used. More...
 
void setDeactivateOnFocusChange (bool deactivate)
 Indicates whether the window will automatically deactivate itself when it loses focus. More...
 
void setDepthBufferPool (uint16 poolId)
 Sets the pool ID this RenderTarget should query from. More...
 
virtual void setFSAA (uint fsaa, const String &fsaaHint)
 Set the level of multisample AA to be used if hardware support it. More...
 
virtual void setFullscreen (bool fullScreen, unsigned int widthPt, unsigned int heightPt)
 Alter fullscreen mode options. More...
 
virtual void setHidden (bool hidden)
 Hide (or show) the window. More...
 
virtual void setPriority (uchar priority)
 Sets the priority of this render target in relation to the others. More...
 
virtual void setVisible (bool visible)
 Set the visibility state. More...
 
void setVSyncEnabled (bool vsync)
 Enable or disable vertical sync for the RenderWindow. More...
 
void setVSyncInterval (unsigned interval)
 
virtual void setVSyncInterval (unsigned int interval)
 Set the vertical sync interval. More...
 
PixelFormat suggestPixelFormat () const
 Override since windows don't usually have alpha. More...
 
void swapBuffers ()
 Swaps the frame buffers to display the next frame. More...
 
virtual void update (bool swapBuffers=true)
 Tells the target to update it's contents. More...
 
void updateStats (void)
 
virtual void windowMovedOrResized ()
 Notify that the window has been resized. More...
 
void writeContentsToFile (const String &filename)
 Writes the current contents of the render target to the named file. More...
 
virtual String writeContentsToTimestampedFile (const String &filenamePrefix, const String &filenameSuffix)
 Writes the current contents of the render target to the (PREFIX)(time-stamp)(SUFFIX) file. More...
 

Member Enumeration Documentation

◆ StatFlags

Enumerator
SF_NONE 
SF_FPS 
SF_AVG_FPS 
SF_BEST_FPS 
SF_WORST_FPS 
SF_TRIANGLE_COUNT 
SF_ALL 

◆ FrameBuffer

Enumerator
FB_FRONT 
FB_BACK 
FB_AUTO 

Constructor & Destructor Documentation

◆ D3D11RenderWindowSwapChainBased()

Ogre::D3D11RenderWindowSwapChainBased::D3D11RenderWindowSwapChainBased ( D3D11Device device)

◆ ~D3D11RenderWindowSwapChainBased()

Ogre::D3D11RenderWindowSwapChainBased::~D3D11RenderWindowSwapChainBased ( )
inline

Member Function Documentation

◆ destroy()

virtual void Ogre::D3D11RenderWindowSwapChainBased::destroy ( void  )
virtual

Destroys the window.

Reimplemented from Ogre::D3D11RenderWindowBase.

◆ _getSwapChain()

IDXGISwapChainN* Ogre::D3D11RenderWindowSwapChainBased::_getSwapChain ( )
inline

Get the swapchain details.

◆ _getSwapChainDescription()

DXGI_SWAP_CHAIN_DESC_N* Ogre::D3D11RenderWindowSwapChainBased::_getSwapChainDescription ( void  )
inline

◆ _shouldRebindBackBuffer()

virtual bool Ogre::D3D11RenderWindowSwapChainBased::_shouldRebindBackBuffer ( )
inlinevirtual

Reimplemented from Ogre::D3D11RenderWindowBase.

◆ setFSAA()

virtual void Ogre::D3D11RenderWindowSwapChainBased::setFSAA ( uint  fsaa,
const String fsaaHint 
)
inlinevirtual

Set the level of multisample AA to be used if hardware support it.

This option will be ignored if the hardware does not support it or setting can not be changed on the fly on per-target level.

Parameters
fsaaThe number of samples
fsaaHintAny hinting text (
See also
Root::createRenderWindow)

Reimplemented from Ogre::D3D11RenderWindowBase.

◆ setVSyncEnabled()

void Ogre::D3D11RenderWindowSwapChainBased::setVSyncEnabled ( bool  vsync)
inlinevirtual

Enable or disable vertical sync for the RenderWindow.

Reimplemented from Ogre::RenderWindow.

◆ isVSyncEnabled()

bool Ogre::D3D11RenderWindowSwapChainBased::isVSyncEnabled ( ) const
inlinevirtual

Indicates whether vertical sync is activated for the window.

Reimplemented from Ogre::RenderWindow.

◆ setVSyncInterval() [1/2]

void Ogre::D3D11RenderWindowSwapChainBased::setVSyncInterval ( unsigned  interval)
inline

◆ getVSyncInterval()

unsigned Ogre::D3D11RenderWindowSwapChainBased::getVSyncInterval ( ) const
inlinevirtual

Returns the vertical sync interval.

Reimplemented from Ogre::RenderWindow.

References Ogre::D3D11Mappings::_getGammaFormat(), and _OgreD3D11Export.

◆ swapBuffers()

void Ogre::D3D11RenderWindowSwapChainBased::swapBuffers ( )
virtual

Swaps the frame buffers to display the next frame.

Remarks
For targets that are double-buffered so that no 'in-progress' versions of the scene are displayed during rendering. Once rendering has completed (to an off-screen version of the window) the buffers are swapped to display the new frame.

Reimplemented from Ogre::RenderTarget.

◆ updateStats()

void Ogre::D3D11RenderWindowSwapChainBased::updateStats ( void  )
virtual

Reimplemented from Ogre::RenderTarget.

◆ create() [1/2]

virtual void Ogre::D3D11RenderWindowBase::create ( const String name,
unsigned  widthPt,
unsigned  heightPt,
bool  fullScreen,
const NameValuePairList miscParams 
)
virtualinherited

◆ create() [2/2]

virtual void Ogre::RenderWindow::create ( const String name,
unsigned int  widthPt,
unsigned int  heightPt,
bool  fullScreen,
const NameValuePairList miscParams 
)
pure virtualinherited

Creates & displays the new window.

Parameters
widthPtThe width of the window in view points.
heightPtThe height of the window in view points.
fullScreenIf true, the window fills the screen, with no title bar or border.
miscParamsA variable number of pointers to platform-specific arguments. The actual requirements must be defined by the implementing subclasses.

Implemented in Ogre::D3D9RenderWindow.

◆ reposition()

void Ogre::D3D11RenderWindowBase::reposition ( int  leftPt,
int  topPt 
)
inlinevirtualinherited

Reposition the window.

Implements Ogre::RenderWindow.

◆ resize()

void Ogre::D3D11RenderWindowBase::resize ( unsigned int  widthPt,
unsigned int  heightPt 
)
inlinevirtualinherited

Alter the size of the window.

Implements Ogre::RenderWindow.

◆ isClosed()

bool Ogre::D3D11RenderWindowBase::isClosed ( ) const
inlinevirtualinherited

Indicates whether the window has been closed by the user.

Implements Ogre::RenderWindow.

◆ isHidden()

bool Ogre::D3D11RenderWindowBase::isHidden ( void  ) const
inlinevirtualinherited

Indicates whether the window was set to hidden (not displayed)

Reimplemented from Ogre::RenderWindow.

◆ getCustomAttribute() [1/2]

void Ogre::D3D11RenderWindowBase::getCustomAttribute ( const String name,
void *  pData 
)
virtualinherited

Retrieve a platform or API-specific piece of information.

This method of retrieving information should only be used if you know what you're doing.

Name Description
WINDOW The native window handle. (X11 Window XID/ HWND / NSWindow*)
HWND deprecated (same as WINDOW)
GL_FBOID the id of the OpenGL framebuffer object
GL_MULTISAMPLEFBOID the id of the OpenGL framebuffer object used for multisampling
GLFBO id of the screen OpenGL framebuffer object on iOS
GLCONTEXT deprecated, do not use
FBO deprecated, do not use
TARGET deprecated, do not use
XDISPLAY The X Display connection behind that context.
DISPLAYNAME The X Server name for the connected display.
ATOM The X Atom used in client delete events.
VIEW Cocoa NSView*
NSOPENGLCONTEXT Cocoa NSOpenGLContext*
NSOPENGLPIXELFORMAT Cocoa NSOpenGLPixelFormat*
Parameters
nameThe name of the attribute.
pDataPointer to memory of the right kind of structure to receive the info.

Reimplemented from Ogre::RenderTarget.

◆ getCustomAttribute() [2/2]

uint Ogre::RenderTarget::getCustomAttribute ( const String name)
inlineinherited

simplified API for bindings

This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

◆ copyContentsToMemory() [1/2]

virtual void Ogre::D3D11RenderWindowBase::copyContentsToMemory ( const Box src,
const PixelBox dst,
FrameBuffer  buffer 
)
virtualinherited

Overridden - see RenderTarget.

Implements Ogre::RenderTarget.

◆ copyContentsToMemory() [2/2]

void Ogre::RenderTarget::copyContentsToMemory ( const PixelBox dst,
FrameBuffer  buffer = FB_AUTO 
)
inlineinherited

This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

Deprecated:
This function is deprecated as behavior for dst.size < RenderTarget.size was inconsistent in previous versions of Ogre.

Sometimes the whole rect was used as a source, sometimes the rect with the size equal to the size of destination rect but located in the top left corner of the render target, sometimes the destination rect itself. Use the overload with explicitly specified source and destination boxes instead.

References Ogre::RenderTarget::copyContentsToMemory().

Referenced by Ogre::RenderTarget::copyContentsToMemory().

◆ requiresTextureFlipping()

bool Ogre::D3D11RenderWindowBase::requiresTextureFlipping ( ) const
inlinevirtualinherited

Implements Ogre::RenderTarget.

◆ _validateStereo()

void Ogre::D3D11RenderWindowBase::_validateStereo ( )
inherited

Validate the type of stereo that is enabled for this window.

◆ getViewPointToPixelScale()

virtual float Ogre::RenderWindow::getViewPointToPixelScale ( )
inlinevirtualinherited

Many windowing systems that support HiDPI displays use special points to specify size of the windows and controls, so that windows and controls with hardcoded sizes does not become too small on HiDPI displays.

Such points have constant density ~ 100 points per inch (probably 96 on Windows and 72 on Mac), that is independent of pixel density of real display, and are used through the all windowing system.

Sometimes, such view points are choosen bigger for output devices that are viewed from larger distances, like 30" TV comparing to 30" monitor, therefore maintaining constant points angular density rather than constant linear density.

In any case, all such windowing system provides the way to convert such view points to pixels, be it DisplayProperties::LogicalDpi on WinRT or backingScaleFactor on MacOSX. We use pixels consistently through the Ogre, but window/view management functions takes view points for convenience, as does the rest of windowing system. Such parameters are named using xxxxPt pattern, and should not be mixed with pixels without being converted using getViewPointToPixelScale() function.

Sometimes such scale factor can change on-the-fly, for example if window is dragged to monitor with different DPI. In such situation, window size in view points is usually preserved by windowing system, and Ogre should adjust pixel size of RenderWindow.

◆ setFullscreen()

virtual void Ogre::RenderWindow::setFullscreen ( bool  fullScreen,
unsigned int  widthPt,
unsigned int  heightPt 
)
inlinevirtualinherited

Alter fullscreen mode options.

Note
Nothing will happen unless the settings here are different from the current settings.
Parameters
fullScreenWhether to use fullscreen mode or not.
widthPtThe new width to use
heightPtThe new height to use

Reimplemented in Ogre::D3D9RenderWindow.

◆ windowMovedOrResized()

virtual void Ogre::RenderWindow::windowMovedOrResized ( )
inlinevirtualinherited

Notify that the window has been resized.

Remarks
You don't need to call this unless you created the window externally.

Reimplemented in Ogre::D3D9RenderWindow.

◆ isVisible()

virtual bool Ogre::RenderWindow::isVisible ( void  ) const
inlinevirtualinherited

Indicates whether the window is visible (not minimized or obscured)

Reimplemented in Ogre::D3D9RenderWindow.

◆ setVisible()

virtual void Ogre::RenderWindow::setVisible ( bool  visible)
inlinevirtualinherited

Set the visibility state.

◆ setHidden()

virtual void Ogre::RenderWindow::setHidden ( bool  hidden)
inlinevirtualinherited

Hide (or show) the window.

If called with hidden=true, this will make the window completely invisible to the user.

Remarks
Setting a window to hidden is useful to create a dummy primary RenderWindow hidden from the user so that you can create and recreate your actual RenderWindows without having to recreate all your resources.

Reimplemented in Ogre::D3D9RenderWindow.

◆ setVSyncInterval() [2/2]

virtual void Ogre::RenderWindow::setVSyncInterval ( unsigned int  interval)
inlinevirtualinherited

Set the vertical sync interval.

This indicates the number of vertical retraces to wait for before swapping buffers. A value of 1 is the default.

Reimplemented in Ogre::D3D9RenderWindow.

◆ isActive()

virtual bool Ogre::RenderWindow::isActive ( void  ) const
inlinevirtualinherited

Overridden from RenderTarget, flags invisible windows as inactive.

Reimplemented from Ogre::RenderTarget.

Reimplemented in Ogre::D3D9RenderWindow.

References Ogre::RenderTarget::getMetrics().

◆ isPrimary()

virtual bool Ogre::RenderWindow::isPrimary ( void  ) const
virtualinherited

Indicates whether the window is the primary window.

The primary window is special in that it is destroyed when ogre is shut down, and cannot be destroyed directly. This is the case because it holds the context for vertex, index buffers and textures.

Reimplemented from Ogre::RenderTarget.

◆ isFullScreen()

virtual bool Ogre::RenderWindow::isFullScreen ( void  ) const
virtualinherited

Returns true if window is running in fullscreen mode.

◆ getMetrics() [1/2]

virtual void Ogre::RenderWindow::getMetrics ( unsigned int &  width,
unsigned int &  height,
unsigned int &  colourDepth,
int &  left,
int &  top 
) const
virtualinherited

Overloaded version of getMetrics from RenderTarget, including extra details specific to windowing systems.

Result is in pixels.

◆ getMetrics() [2/2]

virtual void Ogre::RenderTarget::getMetrics ( unsigned int &  width,
unsigned int &  height,
unsigned int &  colourDepth 
)
virtualinherited

Retrieve information about the render target.

Referenced by Ogre::RenderWindow::isActive().

◆ suggestPixelFormat()

PixelFormat Ogre::RenderWindow::suggestPixelFormat ( ) const
inlinevirtualinherited

Override since windows don't usually have alpha.

Reimplemented from Ogre::RenderTarget.

References Ogre::PF_BYTE_RGB.

◆ isDeactivatedOnFocusChange()

bool Ogre::RenderWindow::isDeactivatedOnFocusChange ( ) const
inherited

Returns true if the window will automatically de-activate itself when it loses focus.

◆ setDeactivateOnFocusChange()

void Ogre::RenderWindow::setDeactivateOnFocusChange ( bool  deactivate)
inherited

Indicates whether the window will automatically deactivate itself when it loses focus.

Parameters
deactivatea value of 'true' will cause the window to deactivate itself when it loses focus. 'false' will allow it to continue to render even when window focus is lost.
Note
'true' is the default behavior.

◆ getName()

virtual const String& Ogre::RenderTarget::getName ( void  ) const
virtualinherited

Retrieve target's name.

◆ getWidth()

virtual uint32 Ogre::RenderTarget::getWidth ( void  ) const
virtualinherited

◆ getHeight()

virtual uint32 Ogre::RenderTarget::getHeight ( void  ) const
virtualinherited

◆ getColourDepth()

virtual uint32 Ogre::RenderTarget::getColourDepth ( void  ) const
virtualinherited

◆ setDepthBufferPool()

void Ogre::RenderTarget::setDepthBufferPool ( uint16  poolId)
inherited

Sets the pool ID this RenderTarget should query from.

Default value is POOL_DEFAULT. Set to POOL_NO_DEPTH to avoid using a DepthBuffer (or manually controlling it)

See also
DepthBuffer
Remarks
Changing the pool Id will cause the current depth buffer to be detached unless the old id and the new one are the same

◆ getDepthBufferPool()

uint16 Ogre::RenderTarget::getDepthBufferPool ( ) const
inherited

◆ getDepthBuffer()

DepthBuffer* Ogre::RenderTarget::getDepthBuffer ( ) const
inherited

◆ attachDepthBuffer()

virtual bool Ogre::RenderTarget::attachDepthBuffer ( DepthBuffer depthBuffer)
virtualinherited

◆ detachDepthBuffer()

◆ _detachDepthBuffer()

virtual void Ogre::RenderTarget::_detachDepthBuffer ( )
virtualinherited

Detaches DepthBuffer without notifying it from the detach.

Useful when called from the DepthBuffer while it iterates through attached RenderTargets (

See also
DepthBuffer::_setPoolId())

Reimplemented in Ogre::GLFBORenderTexture, Ogre::GL3PlusFBOMultiRenderTarget, Ogre::GL3PlusFBORenderTexture, Ogre::GLES2FBOMultiRenderTarget, Ogre::GLES2FBORenderTexture, and Ogre::GLFBOMultiRenderTarget.

◆ update()

virtual void Ogre::RenderTarget::update ( bool  swapBuffers = true)
virtualinherited

Tells the target to update it's contents.

Remarks
If OGRE is not running in an automatic rendering loop (started using Root::startRendering), the user of the library is responsible for asking each render target to refresh. This is the method used to do this. It automatically re-renders the contents of the target using whatever cameras have been pointed at it (using Camera::setRenderTarget).
This allows OGRE to be used in multi-windowed utilities and for contents to be refreshed only when required, rather than constantly as with the automatic rendering loop.
Parameters
swapBuffersFor targets that support double-buffering, if set to true, the target will immediately swap it's buffers after update. Otherwise, the buffers are not swapped, and you have to call swapBuffers yourself sometime later. You might want to do this on some rendersystems which pause for queued rendering commands to complete before accepting swap buffers calls - so you could do other CPU tasks whilst the queued commands complete. Or, you might do this if you want custom control over your windows, such as for externally created windows.

Reimplemented in Ogre::D3D9RenderTexture, and Ogre::D3D9MultiRenderTarget.

◆ addViewport()

virtual Viewport* Ogre::RenderTarget::addViewport ( Camera cam,
int  ZOrder = 0,
float  left = 0.0f,
float  top = 0.0f,
float  width = 1.0f,
float  height = 1.0f 
)
virtualinherited

Adds a viewport to the rendering target.

Remarks
A viewport is the rectangle into which rendering output is sent. This method adds a viewport to the render target, rendering from the supplied camera. The rest of the parameters are only required if you wish to add more than one viewport to a single rendering target. Note that size information passed to this method is passed as a parametric, i.e. it is relative rather than absolute. This is to allow viewports to automatically resize along with the target.
Parameters
camThe camera from which the viewport contents will be rendered (mandatory)
ZOrderThe relative order of the viewport with others on the target (allows overlapping viewports i.e. picture-in-picture). Higher Z-orders are on top of lower ones. The actual number is irrelevant, only the relative Z-order matters (you can leave gaps in the numbering)
leftThe relative position of the left of the viewport on the target, as a value between 0 and 1.
topThe relative position of the top of the viewport on the target, as a value between 0 and 1.
widthThe relative width of the viewport on the target, as a value between 0 and 1.
heightThe relative height of the viewport on the target, as a value between 0 and 1.

◆ getNumViewports()

virtual unsigned short Ogre::RenderTarget::getNumViewports ( void  ) const
virtualinherited

Returns the number of viewports attached to this target.

◆ getViewport()

virtual Viewport* Ogre::RenderTarget::getViewport ( unsigned short  index)
virtualinherited

Retrieves a pointer to the viewport with the given index.

◆ getViewportByZOrder()

virtual Viewport* Ogre::RenderTarget::getViewportByZOrder ( int  ZOrder)
virtualinherited

Retrieves a pointer to the viewport with the given Z-order.

Remarks
throws if not found.

◆ hasViewportWithZOrder()

virtual bool Ogre::RenderTarget::hasViewportWithZOrder ( int  ZOrder)
virtualinherited

Returns true if and only if a viewport exists at the given Z-order.

◆ removeViewport()

virtual void Ogre::RenderTarget::removeViewport ( int  ZOrder)
virtualinherited

Removes a viewport at a given Z-order.

◆ removeAllViewports()

virtual void Ogre::RenderTarget::removeAllViewports ( void  )
virtualinherited

Removes all viewports on this target.

◆ getStatistics()

const FrameStats& Ogre::RenderTarget::getStatistics ( void  ) const
inlineinherited

Retieves details of current rendering performance.

◆ resetStatistics()

void Ogre::RenderTarget::resetStatistics ( void  )
inherited

Resets saved frame-rate statistices.

◆ addListener()

virtual void Ogre::RenderTarget::addListener ( RenderTargetListener listener)
virtualinherited

Add a listener to this RenderTarget which will be called back before & after rendering.

Remarks
If you want notifications before and after a target is updated by the system, use this method to register your own custom RenderTargetListener class. This is useful for potentially adding your own manual rendering commands before and after the 'normal' system rendering.
NB this should not be used for frame-based scene updates, use Root::addFrameListener for that.

◆ insertListener()

virtual void Ogre::RenderTarget::insertListener ( RenderTargetListener listener,
const unsigned int  pos = 0 
)
virtualinherited

same as addListener, but force the position in the vector, so we can control the call order

◆ removeListener()

virtual void Ogre::RenderTarget::removeListener ( RenderTargetListener listener)
virtualinherited

Removes a RenderTargetListener previously registered using addListener.

◆ removeAllListeners()

virtual void Ogre::RenderTarget::removeAllListeners ( void  )
virtualinherited

Removes all listeners from this instance.

◆ setPriority()

virtual void Ogre::RenderTarget::setPriority ( uchar  priority)
inlinevirtualinherited

Sets the priority of this render target in relation to the others.

Remarks
This can be used in order to schedule render target updates. Lower priorities will be rendered first. Note that the priority must be set at the time the render target is attached to the render system, changes afterwards will not affect the ordering.

◆ getPriority()

virtual uchar Ogre::RenderTarget::getPriority ( ) const
inlinevirtualinherited

Gets the priority of a render target.

◆ setActive()

virtual void Ogre::RenderTarget::setActive ( bool  state)
virtualinherited

Used to set the active state of the render target.

◆ setAutoUpdated()

virtual void Ogre::RenderTarget::setAutoUpdated ( bool  autoupdate)
virtualinherited

Sets whether this target should be automatically updated if Ogre's rendering loop or Root::_updateAllRenderTargets is being used.

Remarks
By default, if you use Ogre's own rendering loop (Root::startRendering) or call Root::_updateAllRenderTargets, all render targets are updated automatically. This method allows you to control that behaviour, if for example you have a render target which you only want to update periodically.
Parameters
autoupdateIf true, the render target is updated during the automatic render loop or when Root::_updateAllRenderTargets is called. If false, the target is only updated when its update() method is called explicitly.

◆ isAutoUpdated()

virtual bool Ogre::RenderTarget::isAutoUpdated ( void  ) const
virtualinherited

Gets whether this target is automatically updated if Ogre's rendering loop or Root::_updateAllRenderTargets is being used.

◆ writeContentsToFile()

void Ogre::RenderTarget::writeContentsToFile ( const String filename)
inherited

Writes the current contents of the render target to the named file.

◆ writeContentsToTimestampedFile()

virtual String Ogre::RenderTarget::writeContentsToTimestampedFile ( const String filenamePrefix,
const String filenameSuffix 
)
virtualinherited

Writes the current contents of the render target to the (PREFIX)(time-stamp)(SUFFIX) file.

Returns
the name of the file used.

◆ _notifyCameraRemoved()

virtual void Ogre::RenderTarget::_notifyCameraRemoved ( const Camera cam)
virtualinherited

Utility method to notify a render target that a camera has been removed, incase it was referring to it as a viewer.

◆ isStereoEnabled()

virtual bool Ogre::RenderTarget::isStereoEnabled ( void  ) const
virtualinherited

Indicates whether stereo is currently enabled for this target.

Default is false.

◆ isHardwareGammaEnabled()

virtual bool Ogre::RenderTarget::isHardwareGammaEnabled ( ) const
inlinevirtualinherited

Indicates whether on rendering, linear colour space is converted to sRGB gamma colour space.

This is the exact opposite conversion of what is indicated by Texture::isHardwareGammaEnabled, and can only be enabled on creation of the render target. For render windows, it's enabled through the 'gamma' creation misc parameter. For textures, it is enabled through the hwGamma parameter to the create call.

◆ getFSAA()

virtual uint Ogre::RenderTarget::getFSAA ( ) const
inlinevirtualinherited

Indicates whether multisampling is performed on rendering and at what level.

◆ getFSAAHint()

virtual const String& Ogre::RenderTarget::getFSAAHint ( ) const
inlinevirtualinherited

Gets the FSAA hint (.

See also
Root::createRenderWindow)

◆ _getImpl()

virtual Impl* Ogre::RenderTarget::_getImpl ( )
virtualinherited

Get rendersystem specific interface for this RenderTarget.

This is used by the RenderSystem to (un)bind this target, and to get specific information like surfaces and framebuffer objects.

◆ _beginUpdate()

virtual void Ogre::RenderTarget::_beginUpdate ( )
virtualinherited

Method for manual management of rendering : fires 'preRenderTargetUpdate' and initialises statistics etc.

Remarks
  • _beginUpdate resets statistics and fires 'preRenderTargetUpdate'.
  • _updateViewport renders the given viewport (even if it is not autoupdated), fires preViewportUpdate and postViewportUpdate and manages statistics.
  • _updateAutoUpdatedViewports renders only viewports that are auto updated, fires preViewportUpdate and postViewportUpdate and manages statistics.
  • _endUpdate() ends statistics calculation and fires postRenderTargetUpdate.
you can use it like this for example :
    renderTarget->_beginUpdate();
    renderTarget->_updateViewport(1); // which is not auto updated
    renderTarget->_updateViewport(2); // which is not auto updated
    renderTarget->_updateAutoUpdatedViewports();
    renderTarget->_endUpdate();
    renderTarget->swapBuffers();
Please note that in that case, the zorder may not work as you expect, since you are responsible for calling _updateViewport in the correct order.

Reimplemented in Ogre::D3D9RenderWindow.

◆ _updateViewport() [1/2]

virtual void Ogre::RenderTarget::_updateViewport ( int  zorder,
bool  updateStatistics = true 
)
virtualinherited

Method for manual management of rendering - renders the given viewport (even if it is not autoupdated)

Remarks
This also fires preViewportUpdate and postViewportUpdate, and manages statistics. You should call it between _beginUpdate() and _endUpdate().
See also
_beginUpdate for more details.
Parameters
zorderThe zorder of the viewport to update.
updateStatisticsWhether you want to update statistics or not.

◆ _updateViewport() [2/2]

virtual void Ogre::RenderTarget::_updateViewport ( Viewport viewport,
bool  updateStatistics = true 
)
virtualinherited

Method for manual management of rendering - renders the given viewport (even if it is not autoupdated)

Remarks
This also fires preViewportUpdate and postViewportUpdate, and manages statistics if needed. You should call it between _beginUpdate() and _endUpdate().
See also
_beginUpdate for more details.
Parameters
viewportThe viewport you want to update, it must be bound to the rendertarget.
updateStatisticsWhether you want to update statistics or not.

Reimplemented in Ogre::D3D9RenderWindow.

◆ _updateAutoUpdatedViewports()

virtual void Ogre::RenderTarget::_updateAutoUpdatedViewports ( bool  updateStatistics = true)
virtualinherited

Method for manual management of rendering - renders only viewports that are auto updated.

Remarks
This also fires preViewportUpdate and postViewportUpdate, and manages statistics. You should call it between _beginUpdate() and _endUpdate(). See _beginUpdate for more details.
Parameters
updateStatisticsWhether you want to update statistics or not.
See also
_beginUpdate()

◆ _endUpdate()

virtual void Ogre::RenderTarget::_endUpdate ( )
virtualinherited

Method for manual management of rendering - finishes statistics calculation and fires 'postRenderTargetUpdate'.

Remarks
You should call it after a _beginUpdate
See also
_beginUpdate for more details.

Reimplemented in Ogre::D3D9RenderWindow.


The documentation for this class was generated from the following file: