OGRE  2.2.4
Object-Oriented Graphics Rendering Engine
Ogre::ManualObject Class Reference

#include <OgreManualObject2.h>

+ Inheritance diagram for Ogre::ManualObject:

Classes

class  ManualObjectSection
 Built, renderable section of geometry. More...
 

Public Types

typedef FastArray< MovableObject * > MovableObjectArray
 SceneManager::cullFrustum More...
 
typedef vector< ManualObjectSection * >::type SectionList
 

Public Member Functions

 ManualObject (IdType id, ObjectMemoryManager *objectMemoryManager, SceneManager *manager)
 
virtual ~ManualObject ()
 
LightList_getLightList ()
 Returns a pointer to the current list of lights for this object. More...
 
SceneManager_getManager (void) const
 Get the manager of this object, if any (internal use only) More...
 
ObjectData_getObjectData ()
 Returns a direct access to the ObjectData state. More...
 
const Matrix4_getParentNodeFullTransform (void) const
 Returns the full transformation of the parent sceneNode or the attachingPoint node. More...
 
virtual void _notifyAttached (Node *parent)
 Internal method called to notify the object that it has been attached to a node. More...
 
void _notifyManager (SceneManager *man)
 Notify the object of it's manager (internal use only) More...
 
virtual void _notifyParentNodeMemoryChanged (void)
 Node::_callMemoryChangeListeners More...
 
virtual void _notifyStaticDirty (void) const
 Called by SceneManager when it is telling we're a static MovableObject being dirty Don't call this directly. More...
 
virtual void _releaseManualHardwareResources ()
 Notifies the movable object that hardware resources were lost. More...
 
virtual void _restoreManualHardwareResources ()
 Notifies the movable object that hardware resources should be restored. More...
 
virtual void _updateRenderQueue (RenderQueue *queue, Camera *camera, const Camera *lodCamera)
 Internal method by which the movable object must add Renderable subclass instances to the rendering queue. More...
 
void addQueryFlags (uint32 flags)
 As setQueryFlags, except the flags passed as parameters are appended to the existing flags on this object. More...
 
void addVisibilityFlags (uint32 flags)
 As setVisibilityFlags, except the flags passed as parameters are appended to the existing flags on this object. More...
 
virtual_l1 void begin (const String &datablockName, OperationType opType=OT_TRIANGLE_LIST)
 Start defining a part of the object. More...
 
virtual_l1 void beginUpdate (size_t sectionIndex)
 Start the definition of an update to a part of the object. More...
 
virtual_l1 void clear (void)
 Completely clear the contents of the object. More...
 
virtual_l1 void colour (const ColourValue &col)
 Add a vertex diffuse colour to a vertex. More...
 
virtual_l1 void colour (Real r, Real g, Real b, Real a=1.0f)
 Add a vertex diffuse colour to a vertex. More...
 
virtual_l1 MeshPtr convertToMesh (const String &meshName, const String &groupName=ResourceGroupManager::DEFAULT_RESOURCE_GROUP_NAME, bool buildShadowMapBuffers=true)
 Convert this object to a Mesh. More...
 
virtual AnimableValuePtr createAnimableValue (const String &valueName)
 Create a reference-counted AnimableValuePtr for the named value. More...
 
size_t currentIndexCount ()
 Get the current count of indices when building a new buffer. More...
 
size_t currentVertexCount ()
 Get the current count of vertices when building a new buffer. More...
 
void detachFromParent (void)
 Detaches an object from a parent SceneNode if attached. More...
 
virtual_l1 ManualObjectSectionend (void)
 Finish defining the object and compile the final renderable version. More...
 
virtual_l1 void estimateIndexCount (size_t icount)
 Estimate the number of indices ahead of time. More...
 
virtual_l1 void estimateVertexCount (size_t vcount)
 Estimate the number of vertices ahead of time. More...
 
const StringVectorgetAnimableValueNames (void) const
 Gets a list of animable value names for this object. More...
 
RealAsUint getCachedDistanceToCamera (void) const
 Returns the distance to camera as calculated in . More...
 
Real getCachedDistanceToCameraAsReal (void) const
 Returns the distance to camera as calculated in . More...
 
bool getCastShadows (void) const
 Returns whether shadow casting is enabled for this object. More...
 
virtual_l1 size_t getCurrentIndexCount () const
 Get the number of indices in the section currently being defined (returns 0 if no section is in progress). More...
 
unsigned char getCurrentMeshLod (void) const
 
virtual_l1 size_t getCurrentVertexCount () const
 Get the number of vertices in the section currently being defined (returns 0 if no section is in progress). More...
 
IdType getId () const
 Get the unique id of this object. More...
 
uint32 getLightMask () const
 Get a bitwise mask which will filter the lights affecting this object. More...
 
ListenergetListener (void) const
 Gets the current listener for this object. More...
 
Aabb getLocalAabb (void) const
 Retrieves the local axis-aligned bounding box for this object. More...
 
float getLocalRadius (void) const
 See getLocalAabb and getWorldRadius. More...
 
const StringgetMovableType (void) const
 
const StringgetName (void) const
 Returns the name of this object. More...
 
unsigned int getNumSections (void) const
 Retrieves the number of ManualObjectSection objects making up this ManualObject. More...
 
NodegetParentNode (void) const
 Returns the node to which this object is attached. More...
 
SceneNodegetParentSceneNode (void) const
 
uint32 getQueryFlags (void) const
 Returns the query flags relevant for this object. More...
 
Real getRenderingDistance (void) const
 Gets the distance at which batches are no longer rendered. More...
 
Real getRenderingMinPixelSize () const
 Returns the minimum pixel size an object needs to be in both screen axes in order to be rendered. More...
 
uint8 getRenderQueueGroup (void) const
 Gets the queue group for this entity, see setRenderQueueGroup for full details. More...
 
ManualObjectSectiongetSection (unsigned int index) const
 Gets a pointer to a ManualObjectSection, i.e. More...
 
ManualObjectSectiongetSection (const Ogre::String &name) const
 Gets a pointer to a previously named ManualObjectSection (via ManualObjectSection::setName). More...
 
Real getShadowRenderingDistance (void) const
 Gets the distance at which batches are no longer casting shadows. More...
 
SkeletonInstancegetSkeletonInstance (void) const
 
UserObjectBindingsgetUserObjectBindings ()
 Return an instance of user objects binding associated with this class. More...
 
const UserObjectBindingsgetUserObjectBindings () const
 Return an instance of user objects binding associated with this class. More...
 
uint32 getVisibilityFlags (void) const
 Returns the visibility flags relevant for this object. More...
 
bool getVisible (void) const
 Gets this object whether to be visible or not, if it has a renderable component. More...
 
Aabb getWorldAabb () const
 Gets the axis aligned box in world space. More...
 
Aabb getWorldAabbUpdated ()
 Gets the axis aligned box in world space. More...
 
float getWorldRadius () const
 Gets the bounding Radius scaled by max( scale.x, scale.y, scale.z ). More...
 
float getWorldRadiusUpdated ()
 Gets the bounding Radius scaled by max( scale.x, scale.y, scale.z ). More...
 
virtual_l1 void index (uint32 idx)
 Add a vertex index to construct faces / lines / points. More...
 
virtual void instanceBatchCullFrustumThreaded (const Frustum *frustum, const Camera *lodCamera, uint32 combinedVisibilityFlags)
 InstancingTheadedCullingMethod, More...
 
bool isAttached (void) const
 Returns true if this object is attached to a Node. More...
 
bool isStatic () const
 Checks whether this MovableObject is static. setStatic. More...
 
bool isVisible (void) const
 Returns whether or not this object is supposed to be visible or not. More...
 
virtual_l1 void line (uint32 i1, uint32 i2)
 Add a set of 2 vertex indices to construct a line; this is a shortcut to calling index() 2 times. More...
 
virtual_l1 void normal (const Vector3 &norm)
 Add a vertex normal to the current vertex. More...
 
virtual_l1 void normal (Real x, Real y, Real z)
 Add a vertex normal to the current vertex. More...
 
void operator delete (void *ptr)
 
void operator delete (void *ptr, void *)
 
void operator delete (void *ptr, const char *, int, const char *)
 
void operator delete[] (void *ptr)
 
void operator delete[] (void *ptr, const char *, int, const char *)
 
void * operator new (size_t sz, const char *file, int line, const char *func)
 operator new, with debug line info More...
 
void * operator new (size_t sz)
 
void * operator new (size_t sz, void *ptr)
 placement operator new More...
 
void * operator new[] (size_t sz, const char *file, int line, const char *func)
 array operator new, with debug line info More...
 
void * operator new[] (size_t sz)
 
bool operator() (const IdObject *left, const IdObject *right)
 
bool operator() (const IdObject &left, const IdObject &right)
 
virtual_l1 void position (const Vector3 &pos)
 Add a vertex position, starting a new vertex at the same time. More...
 
virtual_l1 void position (Real x, Real y, Real z)
 Add a vertex position, starting a new vertex at the same time. More...
 
virtual_l1 void quad (uint32 i1, uint32 i2, uint32 i3, uint32 i4)
 Add a set of 4 vertex indices to construct a quad (out of 2 triangles); this is a shortcut to calling index() 6 times, or triangle() twice. More...
 
const LightListqueryLights (void) const
 Gets a list of lights, ordered relative to how close they are to this movable object. More...
 
void removeQueryFlags (uint32 flags)
 As setQueryFlags, except the flags passed as parameters are removed from the existing flags on this object. More...
 
void removeSection (unsigned int idx)
 Removes the section with given index. More...
 
void removeVisibilityFlags (uint32 flags)
 As setVisibilityFlags, except the flags passed as parameters are removed from the existing flags on this object. More...
 
void setCastShadows (bool enabled)
 Sets whether or not this object will cast shadows. More...
 
void setDatablock (size_t subIndex, const String &name)
 Alter the material for a subsection of this object after it has been specified. More...
 
void setLightMask (uint32 lightMask)
 Set a bitwise mask which will filter the lights affecting this object. More...
 
void setListener (Listener *listener)
 Sets a listener for this object. More...
 
void setLocalAabb (const Aabb box)
 Sets the local axis-aligned bounding box for this object. More...
 
void setName (const String &name)
 Sets a custom name for this node. More...
 
void setQueryFlags (uint32 flags)
 Sets the query flags for this object. More...
 
void setRenderingDistance (Real dist)
 Sets the distance at which the object is no longer rendered. More...
 
void setRenderingMinPixelSize (Real pixelSize)
 Sets the minimum pixel size an object needs to be in both screen axes in order to be rendered. More...
 
virtual void setRenderQueueGroup (uint8 queueID)
 Sets the render queue group this entity will be rendered through. More...
 
void setShadowRenderingDistance (Real dist)
 Sets the distance at which the object is no longer casting shadows. More...
 
bool setStatic (bool bStatic)
 Turns this Node into static or dynamic. More...
 
void setVisibilityFlags (uint32 flags)
 Sets the visibility flags for this object. More...
 
void setVisible (bool visible)
 Tells this object whether to be visible or not, if it has a renderable component. More...
 
virtual_l1 void specular (const ColourValue &col)
 Add a vertex specular colour to a vertex. More...
 
virtual_l1 void specular (Real r, Real g, Real b, Real a=1.0f)
 Add a vertex specular colour to a vertex. More...
 
virtual_l1 void tangent (const Vector3 &tan)
 Add a vertex tangent to the current vertex. More...
 
virtual_l1 void tangent (Real x, Real y, Real z)
 Add a vertex tangent to the current vertex. More...
 
virtual_l1 void textureCoord (Real u)
 Add a texture coordinate to the current vertex. More...
 
virtual_l1 void textureCoord (Real u, Real v)
 Add a texture coordinate to the current vertex. More...
 
virtual_l1 void textureCoord (Real u, Real v, Real w)
 Add a texture coordinate to the current vertex. More...
 
virtual_l1 void textureCoord (Real x, Real y, Real z, Real w)
 Add a texture coordinate to the current vertex. More...
 
virtual_l1 void textureCoord (const Vector2 &uv)
 Add a texture coordinate to the current vertex. More...
 
virtual_l1 void textureCoord (const Vector3 &uvw)
 Add a texture coordinate to the current vertex. More...
 
virtual_l1 void textureCoord (const Vector4 &xyzw)
 Add a texture coordinate to the current vertex. More...
 
virtual_l1 void triangle (uint32 i1, uint32 i2, uint32 i3)
 Add a set of 3 vertex indices to construct a triangle; this is a shortcut to calling index() 3 times. More...
 

Static Public Member Functions

static void buildLightList (const size_t numNodes, ObjectData t, const LightListInfo &globalLightList)
 SceneManager::buildLightList More...
 
static void calculateCastersBox (const size_t numNodes, ObjectData t, uint32 sceneVisibilityFlags, AxisAlignedBox *outBox)
 
static void cullFrustum (const size_t numNodes, ObjectData t, const Camera *frustum, uint32 sceneVisibilityFlags, MovableObjectArray &outCulledObjects, const Camera *lodCamera)
 
static void cullLights (const size_t numNodes, ObjectData t, uint32 sceneLightMask, LightListInfo &outGlobalLightList, const FrustumVec &frustums, const FrustumVec &cubemapFrustums)
 SceneManager::cullLights & More...
 
static uint32 getDefaultLightMask ()
 Get the default light mask for all future MovableObject instances. More...
 
static uint32 getDefaultQueryFlags ()
 Get the default query flags for all future MovableObject instances. More...
 
static uint32 getDefaultVisibilityFlags ()
 Get the default visibility flags for all future MovableObject instances. More...
 
static void setDefaultLightMask (uint32 mask)
 Set the default light mask for all future MovableObject instances. More...
 
static void setDefaultQueryFlags (uint32 flags)
 Set the default query flags for all future MovableObject instances. More...
 
static void setDefaultVisibilityFlags (uint32 flags)
 Set the default visibility flags for all future MovableObject instances. More...
 
static void updateAllBounds (const size_t numNodes, ObjectData t)
 SceneManager::updateAllBounds More...
 

Public Attributes

size_t mGlobalIndex
 Index in the vector holding this MO reference (could be our parent node, or a global array tracking all movable objecst to avoid memory leaks). More...
 
size_t mParentIndex
 Index in the vector holding this MO reference (could be our parent node, or a global array tracking all movable objecst to avoid memory leaks). More...
 
RenderableArray mRenderables
 

Static Public Attributes

static const FastArray< Realc_DefaultLodMesh
 

Member Typedef Documentation

◆ MovableObjectArray

SceneManager::cullFrustum

Remarks
We don't pass by reference on purpose (avoid implicit aliasing) We perform frustum culling AND test visibility mask at the same time
Parameters
frustumFrustum to clip against
sceneVisibilityFlagsCombined scene's visibility flags (i.e. viewport | scene). Set LAYER_SHADOW_CASTER bit if you want to exclude non-shadow casters.
outCulledObjectsOut. List of objects that are (fully or partially) inside the frustum and should be rendered
lodCameraCamera in which lod levels calculations are based (i.e. during shadow pass renders) Note however, we only use this camera to calulate if should be visible according to mUpperDistance

◆ SectionList

Constructor & Destructor Documentation

◆ ManualObject()

Ogre::ManualObject::ManualObject ( IdType  id,
ObjectMemoryManager objectMemoryManager,
SceneManager manager 
)

◆ ~ManualObject()

virtual Ogre::ManualObject::~ManualObject ( )
virtual

Member Function Documentation

◆ _getLightList()

LightList* Ogre::MovableObject::_getLightList ( )
inlineinherited

Returns a pointer to the current list of lights for this object.

Remarks
You should not modify this list outside of MovableObject::Listener::objectQueryLights (say if you want to use it to implement this method, and use the pointer as a return value) and for reading it's only accurate as at the last frame.

◆ _getManager()

SceneManager* Ogre::MovableObject::_getManager ( void  ) const
inlineinherited

Get the manager of this object, if any (internal use only)

◆ _getObjectData()

ObjectData& Ogre::MovableObject::_getObjectData ( )
inlineinherited

Returns a direct access to the ObjectData state.

◆ _getParentNodeFullTransform()

const Matrix4& Ogre::MovableObject::_getParentNodeFullTransform ( void  ) const
inherited

Returns the full transformation of the parent sceneNode or the attachingPoint node.

◆ _notifyAttached()

virtual void Ogre::MovableObject::_notifyAttached ( Node parent)
virtualinherited

Internal method called to notify the object that it has been attached to a node.

Reimplemented in Ogre::v1::Entity, and Ogre::ParticleSystem.

◆ _notifyManager()

void Ogre::MovableObject::_notifyManager ( SceneManager man)
inlineinherited

Notify the object of it's manager (internal use only)

◆ _notifyParentNodeMemoryChanged()

virtual void Ogre::MovableObject::_notifyParentNodeMemoryChanged ( void  )
inlinevirtualinherited

◆ _notifyStaticDirty()

virtual void Ogre::MovableObject::_notifyStaticDirty ( void  ) const
inlinevirtualinherited

Called by SceneManager when it is telling we're a static MovableObject being dirty Don't call this directly.

See also
SceneManager::notifyStaticDirty

◆ _releaseManualHardwareResources()

virtual void Ogre::MovableObject::_releaseManualHardwareResources ( )
inlinevirtualinherited

Notifies the movable object that hardware resources were lost.

Remarks
Called automatically by RenderSystem if hardware resources were lost and can not be restored using some internal mechanism. Among affected resources are nested shadow renderables, ManualObjects, etc.

Reimplemented in Ogre::v1::BillboardSet, and Ogre::v1::ManualObject.

◆ _restoreManualHardwareResources()

virtual void Ogre::MovableObject::_restoreManualHardwareResources ( )
inlinevirtualinherited

Notifies the movable object that hardware resources should be restored.

Remarks
Called automatically by RenderSystem if hardware resources were lost and can not be restored using some internal mechanism. Among affected resources are nested shadow renderables, ManualObjects, etc.

◆ _updateRenderQueue()

virtual void Ogre::MovableObject::_updateRenderQueue ( RenderQueue queue,
Camera camera,
const Camera lodCamera 
)
inlinevirtualinherited

Internal method by which the movable object must add Renderable subclass instances to the rendering queue.

Remarks
The engine will call this method when this object is to be rendered. The object must then create one or more Renderable subclass instances which it places on the passed in Queue for rendering.

Reimplemented in Ogre::v1::BillboardSet, Ogre::v1::StaticGeometry::Region, Ogre::v1::ManualObject, Ogre::ParticleSystem, Ogre::Light, Ogre::v1::Entity, Ogre::v1::BillboardChain, and Ogre::MovablePlane.

◆ addQueryFlags()

void Ogre::MovableObject::addQueryFlags ( uint32  flags)
inlineinherited

As setQueryFlags, except the flags passed as parameters are appended to the existing flags on this object.

◆ addVisibilityFlags()

void Ogre::MovableObject::addVisibilityFlags ( uint32  flags)
inlineinherited

As setVisibilityFlags, except the flags passed as parameters are appended to the existing flags on this object.

◆ begin()

virtual_l1 void Ogre::ManualObject::begin ( const String datablockName,
OperationType  opType = OT_TRIANGLE_LIST 
)

Start defining a part of the object.

Remarks
Each time you call this method, you start a new section of the object with its own material and potentially its own type of rendering operation (triangles, points or lines for example).
Parameters
datablockNameThe name of the datablock to render this part of the object with.
opTypeThe type of operation to use to render.

◆ beginUpdate()

virtual_l1 void Ogre::ManualObject::beginUpdate ( size_t  sectionIndex)

Start the definition of an update to a part of the object.

Remarks
Using this method, you can update an existing section of the object efficiently. You do not have the option of changing the operation type obviously, since it must match the one that was used before.
Note
Changing size of the sections is not supported, you are expected to supply the same amount of data with the same layout when updating. If you want to change the data layout, call clear() and create new sections with begin().
Parameters
sectionIndexThe index of the section you want to update. The first call to begin() would have created section 0, the second section 1, etc.

◆ buildLightList()

static void Ogre::MovableObject::buildLightList ( const size_t  numNodes,
ObjectData  t,
const LightListInfo globalLightList 
)
staticinherited

SceneManager::buildLightList

Remarks
We don't pass by reference on purpose (avoid implicit aliasing)
Parameters
globalLightListList of lights already culled against all possible frustums and reorganized contiguously for SoA

◆ calculateCastersBox()

static void Ogre::MovableObject::calculateCastersBox ( const size_t  numNodes,
ObjectData  t,
uint32  sceneVisibilityFlags,
AxisAlignedBox outBox 
)
staticinherited

◆ clear()

virtual_l1 void Ogre::ManualObject::clear ( void  )

Completely clear the contents of the object.

Remarks
Clearing the contents of this object and rebuilding from scratch is not the optimal way to manage dynamic vertex data, since the buffers are recreated. If you want to keep the same structure but update the content within that structure, use beginUpdate() instead of clear() begin(). However if you do want to modify the structure from time to time you can do so by clearing and re-specifying the data.

◆ colour() [1/2]

virtual_l1 void Ogre::ManualObject::colour ( const ColourValue col)

Add a vertex diffuse colour to a vertex.

◆ colour() [2/2]

virtual_l1 void Ogre::ManualObject::colour ( Real  r,
Real  g,
Real  b,
Real  a = 1.0f 
)

Add a vertex diffuse colour to a vertex.

Parameters
r,g,b,aColour components expressed as floating point numbers from 0-1

◆ convertToMesh()

virtual_l1 MeshPtr Ogre::ManualObject::convertToMesh ( const String meshName,
const String groupName = ResourceGroupManager::DEFAULT_RESOURCE_GROUP_NAME,
bool  buildShadowMapBuffers = true 
)

Convert this object to a Mesh.

Remarks
After you've finished building this object, you may convert it to a Mesh if you want in order to be able to create many instances of it in the world (via Item). This is optional, since this instance can be directly attached to a SceneNode itself, but of course only one instance of it can exist that way.
Note
Only objects which use indexed geometry may be converted to a mesh.
Parameters
meshNameThe name to give the mesh
groupNameThe resource group to create the mesh in
buildShadowMapBuffersTrue to create an optimized copy of the vertex buffers for efficient shadow mapping.

◆ createAnimableValue()

virtual AnimableValuePtr Ogre::AnimableObject::createAnimableValue ( const String valueName)
inlinevirtualinherited

Create a reference-counted AnimableValuePtr for the named value.

Remarks
You can use the returned object to animate a value on this object, using AnimationTrack. Subclasses must override this if they wish to support animation of their values.

Reimplemented in Ogre::Light.

References Ogre::Exception::ERR_ITEM_NOT_FOUND, and OGRE_EXCEPT.

◆ cullFrustum()

static void Ogre::MovableObject::cullFrustum ( const size_t  numNodes,
ObjectData  t,
const Camera frustum,
uint32  sceneVisibilityFlags,
MovableObjectArray outCulledObjects,
const Camera lodCamera 
)
staticinherited

◆ cullLights()

static void Ogre::MovableObject::cullLights ( const size_t  numNodes,
ObjectData  t,
uint32  sceneLightMask,
LightListInfo outGlobalLightList,
const FrustumVec frustums,
const FrustumVec cubemapFrustums 
)
staticinherited

SceneManager::cullLights &

See also
MovableObject::cullFrustum Produces the global list of visible lights that is needed in buildLightList
Remarks
We don't pass ObjectData by reference on purpose (avoid implicit aliasing) It's declared here because all affected elements are from MovableObject IMPORTANT: It is assumed that all objects in ObjectData are Lights.
Parameters
outGlobalLightListOutput, a list of lights, contiguously placed
frustumsAn array of all frustums we need to check against
cubemapFrustumsAn array of all frustums that are used at least once as cubemaps ( SceneManager::createCamera)

◆ currentIndexCount()

size_t Ogre::ManualObject::currentIndexCount ( )

Get the current count of indices when building a new buffer.

Returns
Index count

◆ currentVertexCount()

size_t Ogre::ManualObject::currentVertexCount ( )

Get the current count of vertices when building a new buffer.

Returns
Vertex count

◆ detachFromParent()

void Ogre::MovableObject::detachFromParent ( void  )
inherited

Detaches an object from a parent SceneNode if attached.

◆ end()

virtual_l1 ManualObjectSection* Ogre::ManualObject::end ( void  )

Finish defining the object and compile the final renderable version.

Note
Will return a pointer to the finished section or NULL if the section was discarded (i.e. has zero vertices/indices).

◆ estimateIndexCount()

virtual_l1 void Ogre::ManualObject::estimateIndexCount ( size_t  icount)

Estimate the number of indices ahead of time.

Remarks
Calling this helps to avoid memory reallocation when you first define indices with begin() -> end() sequence.

◆ estimateVertexCount()

virtual_l1 void Ogre::ManualObject::estimateVertexCount ( size_t  vcount)

Estimate the number of vertices ahead of time.

Remarks
Calling this helps to avoid memory reallocation when you first define indices with begin() -> end() sequence.

◆ getAnimableValueNames()

const StringVector& Ogre::AnimableObject::getAnimableValueNames ( void  ) const
inlineinherited

Gets a list of animable value names for this object.

References Ogre::Exception::ERR_ITEM_NOT_FOUND, and OGRE_EXCEPT.

◆ getCachedDistanceToCamera()

RealAsUint Ogre::MovableObject::getCachedDistanceToCamera ( void  ) const
inlineinherited

Returns the distance to camera as calculated in .

◆ getCachedDistanceToCameraAsReal()

Real Ogre::MovableObject::getCachedDistanceToCameraAsReal ( void  ) const
inlineinherited

Returns the distance to camera as calculated in .

◆ getCastShadows()

bool Ogre::MovableObject::getCastShadows ( void  ) const
inlineinherited

Returns whether shadow casting is enabled for this object.

◆ getCurrentIndexCount()

virtual_l1 size_t Ogre::ManualObject::getCurrentIndexCount ( ) const

Get the number of indices in the section currently being defined (returns 0 if no section is in progress).

◆ getCurrentMeshLod()

unsigned char Ogre::MovableObject::getCurrentMeshLod ( void  ) const
inlineinherited

◆ getCurrentVertexCount()

virtual_l1 size_t Ogre::ManualObject::getCurrentVertexCount ( ) const

Get the number of vertices in the section currently being defined (returns 0 if no section is in progress).

◆ getDefaultLightMask()

static uint32 Ogre::MovableObject::getDefaultLightMask ( )
inlinestaticinherited

Get the default light mask for all future MovableObject instances.

◆ getDefaultQueryFlags()

static uint32 Ogre::MovableObject::getDefaultQueryFlags ( )
inlinestaticinherited

Get the default query flags for all future MovableObject instances.

◆ getDefaultVisibilityFlags()

static uint32 Ogre::MovableObject::getDefaultVisibilityFlags ( )
inlinestaticinherited

Get the default visibility flags for all future MovableObject instances.

◆ getId()

IdType Ogre::IdObject::getId ( ) const
inlineinherited

Get the unique id of this object.

◆ getLightMask()

uint32 Ogre::MovableObject::getLightMask ( ) const
inlineinherited

Get a bitwise mask which will filter the lights affecting this object.

Remarks
By default, this mask is fully set meaning all lights will affect this object

◆ getListener()

Listener* Ogre::MovableObject::getListener ( void  ) const
inlineinherited

Gets the current listener for this object.

◆ getLocalAabb()

Aabb Ogre::MovableObject::getLocalAabb ( void  ) const
inherited

Retrieves the local axis-aligned bounding box for this object.

Remarks
This bounding box is in local coordinates.

◆ getLocalRadius()

float Ogre::MovableObject::getLocalRadius ( void  ) const
inherited

See getLocalAabb and getWorldRadius.

◆ getMovableType()

const String& Ogre::ManualObject::getMovableType ( void  ) const
virtual

Implements Ogre::MovableObject.

◆ getName()

const String& Ogre::MovableObject::getName ( void  ) const
inlineinherited

Returns the name of this object.

◆ getNumSections()

unsigned int Ogre::ManualObject::getNumSections ( void  ) const

Retrieves the number of ManualObjectSection objects making up this ManualObject.

◆ getParentNode()

Node* Ogre::MovableObject::getParentNode ( void  ) const
inlineinherited

Returns the node to which this object is attached.

◆ getParentSceneNode()

SceneNode* Ogre::MovableObject::getParentSceneNode ( void  ) const
inlineinherited

◆ getQueryFlags()

uint32 Ogre::MovableObject::getQueryFlags ( void  ) const
inlineinherited

Returns the query flags relevant for this object.

◆ getRenderingDistance()

Real Ogre::MovableObject::getRenderingDistance ( void  ) const
inlineinherited

Gets the distance at which batches are no longer rendered.

◆ getRenderingMinPixelSize()

Real Ogre::MovableObject::getRenderingMinPixelSize ( ) const
inlineinherited

Returns the minimum pixel size an object needs to be in both screen axes in order to be rendered.

◆ getRenderQueueGroup()

uint8 Ogre::MovableObject::getRenderQueueGroup ( void  ) const
inlineinherited

Gets the queue group for this entity, see setRenderQueueGroup for full details.

◆ getSection() [1/2]

ManualObjectSection* Ogre::ManualObject::getSection ( unsigned int  index) const

Gets a pointer to a ManualObjectSection, i.e.

a part of a ManualObject.

◆ getSection() [2/2]

ManualObjectSection* Ogre::ManualObject::getSection ( const Ogre::String name) const

Gets a pointer to a previously named ManualObjectSection (via ManualObjectSection::setName).

◆ getShadowRenderingDistance()

Real Ogre::MovableObject::getShadowRenderingDistance ( void  ) const
inlineinherited

Gets the distance at which batches are no longer casting shadows.

◆ getSkeletonInstance()

SkeletonInstance* Ogre::MovableObject::getSkeletonInstance ( void  ) const
inlineinherited

◆ getUserObjectBindings() [1/2]

UserObjectBindings& Ogre::MovableObject::getUserObjectBindings ( )
inlineinherited

Return an instance of user objects binding associated with this class.

You can use it to associate one or more custom objects with this class instance.

See also
UserObjectBindings::setUserAny.

◆ getUserObjectBindings() [2/2]

const UserObjectBindings& Ogre::MovableObject::getUserObjectBindings ( ) const
inlineinherited

Return an instance of user objects binding associated with this class.

You can use it to associate one or more custom objects with this class instance.

See also
UserObjectBindings::setUserAny.

◆ getVisibilityFlags()

uint32 Ogre::MovableObject::getVisibilityFlags ( void  ) const
inlineinherited

Returns the visibility flags relevant for this object.

Reserved visibility flags are not returned.

◆ getVisible()

bool Ogre::MovableObject::getVisible ( void  ) const
inlineinherited

Gets this object whether to be visible or not, if it has a renderable component.

Remarks
Returns the value set by MovableObject::setVisible only.

◆ getWorldAabb()

Aabb Ogre::MovableObject::getWorldAabb ( ) const
inherited

Gets the axis aligned box in world space.

Remarks
Assumes the caches are already updated. Will trigger an assert otherwise. getWorldAabbUpdated if you need the update process to be guaranteed

◆ getWorldAabbUpdated()

Aabb Ogre::MovableObject::getWorldAabbUpdated ( )
inherited

Gets the axis aligned box in world space.

Remarks
Unlike getWorldAabb, this function guarantees the cache stays up to date. It is STRONGLY advised against calling this function for a large number of MovableObject. Refactor your queries so that they happen after SceneManager::updateAllBounds() has been called

◆ getWorldRadius()

float Ogre::MovableObject::getWorldRadius ( ) const
inherited

Gets the bounding Radius scaled by max( scale.x, scale.y, scale.z ).

Remarks
Assumes the caches are already updated. Will trigger an assert otherwise. getWorldRadiusUpdated if you need the update process to be guaranteed

◆ getWorldRadiusUpdated()

float Ogre::MovableObject::getWorldRadiusUpdated ( )
inherited

Gets the bounding Radius scaled by max( scale.x, scale.y, scale.z ).

Remarks
Unlike getWorldRadius, this function guarantees the cache stays up to date. It is STRONGLY advised against calling this function for a large number of MovableObject. Refactor your queries so that they happen after SceneManager::updateAllBounds() has been called

◆ index()

virtual_l1 void Ogre::ManualObject::index ( uint32  idx)

Add a vertex index to construct faces / lines / points.

Remarks
You will have to call this 3 times for each face for a triangle list, or use the alternative 3-parameter version. Other operation types require different numbers of indexes,
See also
OperationType.
Note
32-bit indexes are not supported on all cards and will only be used when required, if an index is > 65535.
Parameters
idxA vertex index from 0 to 4294967295.

Referenced by Ogre::Volume::MeshBuilder::addCubeToManualObject().

◆ instanceBatchCullFrustumThreaded()

virtual void Ogre::MovableObject::instanceBatchCullFrustumThreaded ( const Frustum frustum,
const Camera lodCamera,
uint32  combinedVisibilityFlags 
)
inlinevirtualinherited

InstancingTheadedCullingMethod,

See also
InstanceBatch::instanceBatchCullFrustumThreaded

References ARRAY_PACKED_REALS, Ogre::LodStrategy::lodSet(), and Ogre::LodStrategy::lodUpdateImpl().

◆ isAttached()

bool Ogre::MovableObject::isAttached ( void  ) const
inlineinherited

Returns true if this object is attached to a Node.

◆ isStatic()

bool Ogre::MovableObject::isStatic ( ) const
inherited

Checks whether this MovableObject is static. setStatic.

◆ isVisible()

bool Ogre::MovableObject::isVisible ( void  ) const
inherited

Returns whether or not this object is supposed to be visible or not.

Remarks
Takes into account visibility flags and the setVisible, but not rendering distance.

◆ line()

virtual_l1 void Ogre::ManualObject::line ( uint32  i1,
uint32  i2 
)

Add a set of 2 vertex indices to construct a line; this is a shortcut to calling index() 2 times.

It is only valid for line lists.

Note
32-bit indexes are not supported on all cards and will only be used when required, if an index is > 65535.
Parameters
i1,i22 vertex indices from 0 to 4294967295 defining a face.

◆ normal() [1/2]

virtual_l1 void Ogre::ManualObject::normal ( const Vector3 norm)

Add a vertex normal to the current vertex.

Remarks
Vertex normals are most often used for dynamic lighting, and their components should be normalised.

◆ normal() [2/2]

virtual_l1 void Ogre::ManualObject::normal ( Real  x,
Real  y,
Real  z 
)

Add a vertex normal to the current vertex.

Remarks
Vertex normals are most often used for dynamic lighting, and their components should be normalised.

◆ operator delete() [1/3]

template<class Alloc >
void Ogre::AllocatedObject< Alloc >::operator delete ( void *  ptr)
inlineinherited

◆ operator delete() [2/3]

template<class Alloc >
void Ogre::AllocatedObject< Alloc >::operator delete ( void *  ptr,
void *   
)
inlineinherited

◆ operator delete() [3/3]

template<class Alloc >
void Ogre::AllocatedObject< Alloc >::operator delete ( void *  ptr,
const char *  ,
int  ,
const char *   
)
inlineinherited

◆ operator delete[]() [1/2]

template<class Alloc >
void Ogre::AllocatedObject< Alloc >::operator delete[] ( void *  ptr)
inlineinherited

◆ operator delete[]() [2/2]

template<class Alloc >
void Ogre::AllocatedObject< Alloc >::operator delete[] ( void *  ptr,
const char *  ,
int  ,
const char *   
)
inlineinherited

◆ operator new() [1/3]

template<class Alloc >
void* Ogre::AllocatedObject< Alloc >::operator new ( size_t  sz,
const char *  file,
int  line,
const char *  func 
)
inlineinherited

operator new, with debug line info

◆ operator new() [2/3]

template<class Alloc >
void* Ogre::AllocatedObject< Alloc >::operator new ( size_t  sz)
inlineinherited

◆ operator new() [3/3]

template<class Alloc >
void* Ogre::AllocatedObject< Alloc >::operator new ( size_t  sz,
void *  ptr 
)
inlineinherited

placement operator new

◆ operator new[]() [1/2]

template<class Alloc >
void* Ogre::AllocatedObject< Alloc >::operator new[] ( size_t  sz,
const char *  file,
int  line,
const char *  func 
)
inlineinherited

array operator new, with debug line info

◆ operator new[]() [2/2]

template<class Alloc >
void* Ogre::AllocatedObject< Alloc >::operator new[] ( size_t  sz)
inlineinherited

◆ operator()() [1/2]

bool Ogre::IdObject::operator() ( const IdObject left,
const IdObject right 
)
inlineinherited

◆ operator()() [2/2]

bool Ogre::IdObject::operator() ( const IdObject left,
const IdObject right 
)
inlineinherited

◆ position() [1/2]

virtual_l1 void Ogre::ManualObject::position ( const Vector3 pos)

Add a vertex position, starting a new vertex at the same time.

Remarks
A vertex position is slightly special among the other vertex data methods like normal() and textureCoord(), since calling it indicates the start of a new vertex. All other vertex data methods you call after this are assumed to be adding more information (like normals or texture coordinates) to the last vertex started with position().

Referenced by Ogre::Volume::MeshBuilder::addCubeToManualObject().

◆ position() [2/2]

virtual_l1 void Ogre::ManualObject::position ( Real  x,
Real  y,
Real  z 
)

Add a vertex position, starting a new vertex at the same time.

Remarks
A vertex position is slightly special among the other vertex data methods like normal() and textureCoord(), since calling it indicates the start of a new vertex. All other vertex data methods you call after this are assumed to be adding more information (like normals or texture coordinates) to the last vertex started with position().

◆ quad()

virtual_l1 void Ogre::ManualObject::quad ( uint32  i1,
uint32  i2,
uint32  i3,
uint32  i4 
)

Add a set of 4 vertex indices to construct a quad (out of 2 triangles); this is a shortcut to calling index() 6 times, or triangle() twice.

It's only valid for triangle list operations.

Note
32-bit indexes are not supported on all cards and will only be used when required, if an index is > 65535.
Parameters
i1,i2,i3,i44 vertex indices from 0 to 4294967295 defining a quad.

◆ queryLights()

const LightList& Ogre::MovableObject::queryLights ( void  ) const
inlineinherited

Gets a list of lights, ordered relative to how close they are to this movable object.

Remarks
The lights are filled in
See also
buildLightList
Returns
The list of lights use to lighting this object.

◆ removeQueryFlags()

void Ogre::MovableObject::removeQueryFlags ( uint32  flags)
inlineinherited

As setQueryFlags, except the flags passed as parameters are removed from the existing flags on this object.

◆ removeSection()

void Ogre::ManualObject::removeSection ( unsigned int  idx)

Removes the section with given index.

Parameters
idxIndex of section to remove.

◆ removeVisibilityFlags()

void Ogre::MovableObject::removeVisibilityFlags ( uint32  flags)
inlineinherited

As setVisibilityFlags, except the flags passed as parameters are removed from the existing flags on this object.

◆ setCastShadows()

void Ogre::MovableObject::setCastShadows ( bool  enabled)
inlineinherited

Sets whether or not this object will cast shadows.

Remarks
This setting simply allows you to turn on/off shadows for a given object. An object will not cast shadows unless the scene supports it in any case (see SceneManager::setShadowTechnique), and also the material which is in use must also have shadow casting enabled. By default all entities cast shadows. If, however, for some reason you wish to disable this for a single object then you can do so using this method.
Note
This method normally refers to objects which block the light, but since Light is also a subclass of MovableObject, in that context it means whether the light causes shadows itself.

◆ setDatablock()

void Ogre::ManualObject::setDatablock ( size_t  subIndex,
const String name 
)

Alter the material for a subsection of this object after it has been specified.

Remarks
You specify the datablock to use on a section of this object during the call to begin(), however if you want to change the datablock afterwards you can do so by calling this method.
Note
This function is a shortcut of calling Renderable::setDatablock() on all sections in this manual object. If you want to set a datablock with pointer instead of ID string, you need to get the section and call the appropriate function.
Parameters
subIndexThe index of the subsection to alter
nameThe name of the new datablock to use

◆ setDefaultLightMask()

static void Ogre::MovableObject::setDefaultLightMask ( uint32  mask)
inlinestaticinherited

Set the default light mask for all future MovableObject instances.

◆ setDefaultQueryFlags()

static void Ogre::MovableObject::setDefaultQueryFlags ( uint32  flags)
inlinestaticinherited

Set the default query flags for all future MovableObject instances.

◆ setDefaultVisibilityFlags()

static void Ogre::MovableObject::setDefaultVisibilityFlags ( uint32  flags)
inlinestaticinherited

Set the default visibility flags for all future MovableObject instances.

◆ setLightMask()

void Ogre::MovableObject::setLightMask ( uint32  lightMask)
inlineinherited

Set a bitwise mask which will filter the lights affecting this object.

Remarks
This mask will be compared against the mask held against Light to determine if a light should affect a given object. By default, this mask is fully set meaning all lights will affect this object

◆ setListener()

void Ogre::MovableObject::setListener ( Listener listener)
inlineinherited

Sets a listener for this object.

Remarks
Note for size and performance reasons only one listener per object is allowed.

◆ setLocalAabb()

void Ogre::MovableObject::setLocalAabb ( const Aabb  box)
inherited

Sets the local axis-aligned bounding box for this object.

Remarks
This bounding box is in local coordinates.

◆ setName()

void Ogre::MovableObject::setName ( const String name)
inlineinherited

Sets a custom name for this node.

Doesn't have to be unique

◆ setQueryFlags()

void Ogre::MovableObject::setQueryFlags ( uint32  flags)
inlineinherited

Sets the query flags for this object.

Remarks
When performing a scene query, this object will be included or excluded according to flags on the object and flags on the query. This is a bitwise value, so only when a bit on these flags is set, will it be included in a query asking for that flag. The meaning of the bits is application-specific.

◆ setRenderingDistance()

void Ogre::MovableObject::setRenderingDistance ( Real  dist)
inlineinherited

Sets the distance at which the object is no longer rendered.

Parameters
distDistance beyond which the object will not be rendered (the default is FLT_MAX, which means objects are always rendered). Values equal or below zero will be ignored, and cause an assertion in debug mode.

◆ setRenderingMinPixelSize()

void Ogre::MovableObject::setRenderingMinPixelSize ( Real  pixelSize)
inlineinherited

Sets the minimum pixel size an object needs to be in both screen axes in order to be rendered.

Note
Camera::setUseMinPixelSize() needs to be called for this parameter to be used.
Parameters
pixelSizeNumber of minimum pixels (the default is 0, which means objects are always rendered).

◆ setRenderQueueGroup()

virtual void Ogre::MovableObject::setRenderQueueGroup ( uint8  queueID)
virtualinherited

Sets the render queue group this entity will be rendered through.

Remarks
Render queues are grouped to allow you to more tightly control the ordering of rendered objects. If you do not call this method, all Entity objects default to the default queue (RenderQueue::getDefaultQueueGroup), which is fine for most objects. You may want to alter this if you want this entity to always appear in front of other objects, e.g. for a 3D menu system or such.
See RenderQueue for more details.
Parameters
queueIDEnumerated value of the queue group to use. See the enum RenderQueueGroupID for what kind of values can be used here.
Valid render queue ids are between 0 & 254 inclusive

Reimplemented in Ogre::ParticleSystem, Ogre::v1::Entity, Ogre::Decal, Ogre::Light, and Ogre::InternalCubemapProbe.

◆ setShadowRenderingDistance()

void Ogre::MovableObject::setShadowRenderingDistance ( Real  dist)
inlineinherited

Sets the distance at which the object is no longer casting shadows.

Parameters
distDistance beyond which the object will not cast shadows (the default is FLT_MAX, which means objects are always casting shadows). Values equal or below zero will be ignored, and cause an assertion in debug mode.
Note
ShadowRenderingDistance will be clamped to RenderingDistance value
See also
setRenderingDistance

◆ setStatic()

bool Ogre::MovableObject::setStatic ( bool  bStatic)
inherited

Turns this Node into static or dynamic.

Remarks
Switching between dynamic and static has some overhead and forces to update all static scene when converted to static. So don't do it frequently. Static objects are not updated every frame, only when requested explicitly. Use this feature if you plan to have this object unaltered for a very long times
Note all MovableObjects support switching between static & dynamic after they have been created (eg. InstancedEntity)
Changing this attribute will cause to switch the attribute to our parent node, and as a result, all of its other attached entities. Node::setStatic
Returns
True if setStatic made an actual change. False otherwise. Can fail because the object was already static/dynamic, or because switching is not supported

◆ setVisibilityFlags()

void Ogre::MovableObject::setVisibilityFlags ( uint32  flags)
inlineinherited

Sets the visibility flags for this object.

Remarks
As well as a simple true/false value for visibility (as seen in setVisible), you can also set visibility flags that is applied a binary 'and' with the SceneManager's mask and a compositor node pass. To exclude particular objects from rendering. Changes to reserved visibility flags are ignored (won't take effect).

◆ setVisible()

void Ogre::MovableObject::setVisible ( bool  visible)
inlineinherited

Tells this object whether to be visible or not, if it has a renderable component.

Note
An alternative approach of making an object invisible is to detach it from it's SceneNode, or to remove the SceneNode entirely. Detaching a node means that structurally the scene graph changes. Once this change has taken place, the objects / nodes that have been removed have less overhead to the visibility detection pass than simply making the object invisible, so if you do this and leave the objects out of the tree for a long time, it's faster. However, the act of detaching / reattaching nodes is in itself more expensive than setting an object visibility flag, since in the latter case structural changes are not made. Therefore, small or frequent visibility changes are best done using this method; large or more longer term changes are best done by detaching.

◆ specular() [1/2]

virtual_l1 void Ogre::ManualObject::specular ( const ColourValue col)

Add a vertex specular colour to a vertex.

◆ specular() [2/2]

virtual_l1 void Ogre::ManualObject::specular ( Real  r,
Real  g,
Real  b,
Real  a = 1.0f 
)

Add a vertex specular colour to a vertex.

Parameters
r,g,b,aColour components expressed as floating point numbers from 0-1

◆ tangent() [1/2]

virtual_l1 void Ogre::ManualObject::tangent ( const Vector3 tan)

Add a vertex tangent to the current vertex.

Remarks
Vertex tangents are most often used for dynamic lighting, and their components should be normalised. Also, using tangent() you enable VES_TANGENT vertex semantic, which is not supported on old non-SM2 cards.

◆ tangent() [2/2]

virtual_l1 void Ogre::ManualObject::tangent ( Real  x,
Real  y,
Real  z 
)

Add a vertex tangent to the current vertex.

Remarks
Vertex tangents are most often used for dynamic lighting, and their components should be normalised. Also, using tangent() you enable VES_TANGENT vertex semantic, which is not supported on old non-SM2 cards.

◆ textureCoord() [1/7]

virtual_l1 void Ogre::ManualObject::textureCoord ( Real  u)

Add a texture coordinate to the current vertex.

Remarks
You can call this method multiple times between position() calls to add multiple texture coordinates to a vertex. Each one can have between 1 and 3 dimensions, depending on your needs, although 2 is most common. There are several versions of this method for the variations in number of dimensions.

◆ textureCoord() [2/7]

virtual_l1 void Ogre::ManualObject::textureCoord ( Real  u,
Real  v 
)

Add a texture coordinate to the current vertex.

Remarks
You can call this method multiple times between position() calls to add multiple texture coordinates to a vertex. Each one can have between 1 and 3 dimensions, depending on your needs, although 2 is most common. There are several versions of this method for the variations in number of dimensions.

◆ textureCoord() [3/7]

virtual_l1 void Ogre::ManualObject::textureCoord ( Real  u,
Real  v,
Real  w 
)

Add a texture coordinate to the current vertex.

Remarks
You can call this method multiple times between position() calls to add multiple texture coordinates to a vertex. Each one can have between 1 and 3 dimensions, depending on your needs, although 2 is most common. There are several versions of this method for the variations in number of dimensions.

◆ textureCoord() [4/7]

virtual_l1 void Ogre::ManualObject::textureCoord ( Real  x,
Real  y,
Real  z,
Real  w 
)

Add a texture coordinate to the current vertex.

Remarks
You can call this method multiple times between position() calls to add multiple texture coordinates to a vertex. Each one can have between 1 and 3 dimensions, depending on your needs, although 2 is most common. There are several versions of this method for the variations in number of dimensions.

◆ textureCoord() [5/7]

virtual_l1 void Ogre::ManualObject::textureCoord ( const Vector2 uv)

Add a texture coordinate to the current vertex.

Remarks
You can call this method multiple times between position() calls to add multiple texture coordinates to a vertex. Each one can have between 1 and 3 dimensions, depending on your needs, although 2 is most common. There are several versions of this method for the variations in number of dimensions.

◆ textureCoord() [6/7]

virtual_l1 void Ogre::ManualObject::textureCoord ( const Vector3 uvw)

Add a texture coordinate to the current vertex.

Remarks
You can call this method multiple times between position() calls to add multiple texture coordinates to a vertex. Each one can have between 1 and 3 dimensions, depending on your needs, although 2 is most common. There are several versions of this method for the variations in number of dimensions.

◆ textureCoord() [7/7]

virtual_l1 void Ogre::ManualObject::textureCoord ( const Vector4 xyzw)

Add a texture coordinate to the current vertex.

Remarks
You can call this method multiple times between position() calls to add multiple texture coordinates to a vertex. Each one can have between 1 and 3 dimensions, depending on your needs, although 2 is most common. There are several versions of this method for the variations in number of dimensions.

◆ triangle()

virtual_l1 void Ogre::ManualObject::triangle ( uint32  i1,
uint32  i2,
uint32  i3 
)

Add a set of 3 vertex indices to construct a triangle; this is a shortcut to calling index() 3 times.

It is only valid for triangle lists.

Note
32-bit indexes are not supported on all cards and will only be used when required, if an index is > 65535.
Parameters
i1,i2,i33 vertex indices from 0 to 4294967295 defining a face.

◆ updateAllBounds()

static void Ogre::MovableObject::updateAllBounds ( const size_t  numNodes,
ObjectData  t 
)
staticinherited

SceneManager::updateAllBounds

Remarks
We don't pass by reference on purpose (avoid implicit aliasing)

Member Data Documentation

◆ c_DefaultLodMesh

const FastArray<Real> Ogre::MovableObject::c_DefaultLodMesh
staticinherited

◆ mGlobalIndex

size_t Ogre::MovableObject::mGlobalIndex
inherited

Index in the vector holding this MO reference (could be our parent node, or a global array tracking all movable objecst to avoid memory leaks).

Used for O(1) removals.

Remarks
It is the parent (or our creator) the one that sets this value, not ourselves. Do NOT modify it manually.

◆ mParentIndex

size_t Ogre::MovableObject::mParentIndex
inherited

Index in the vector holding this MO reference (could be our parent node, or a global array tracking all movable objecst to avoid memory leaks).

Used for O(1) removals.

Remarks
It is the parent (or our creator) the one that sets this value, not ourselves. Do NOT modify it manually.

◆ mRenderables

RenderableArray Ogre::MovableObject::mRenderables
inherited

The documentation for this class was generated from the following file: